jon boat outrigger floats for sale: 5 Tips

<a href="https://stellaroutdoorlife.com/best-outriggers-for-jon-boat-stability/" class="wu-internal-link">jon boat</a> outrigger <a href="https://stellaroutdoorlife.com/best-floats-for-jon-boat-outriggers/" class="wu-internal-link">floats for</a> sale

jon boat outrigger floats for sale

I was struggling with my jon boat tipping over every time I moved to the stern to reel in a big catch, until I discovered jon boat outrigger floats for sale that transformed my fishing trips into steady, safe adventures.


Key Takeaways
  • jon boat outrigger floats for sale add stability and safety to small boats.
  • They come in inflatable, foam, and rigid designs.
  • Choosing the right size and material depends on your boat weight and water conditions.
  • Installation is straightforward with basic tools and a few hours of work.
  • Regular inspection and proper storage extend the life of your floats.

Introduction

Introduction

I remember the first time I tried to stand up in my jon boat to net a fish. The boat lurched, water sloshed over the gunwales, and my heart raced. I realized I needed more stability without buying a bigger boat. That led me to research jon boat outrigger floats for sale. After installing a pair, my boat felt like a wide‑platform kayak, and I could move freely, cast farther, and stay dry.

In this guide I will walk you through why these floats matter, what benefits they bring, the different types available, how to pick the right set, and how to install them. I’ll share my personal experience, highlight what I like and what could be better, and give you a quick comparison table to help you decide. Finally, I’ll answer the most common questions boaters ask about jon boat outrigger floats for sale.

Why Use jon boat outrigger floats for sale?

Why Use jon boat outrigger floats for sale?

The main reason to add outrigger floats to a jon boat is stability. A jon boat is flat‑bottomed and light, which makes it prone to tipping when weight shifts. Outrigger floats increase the boat’s width, creating a wider base that resists roll.

They also improve safety. When you are standing to cast, landing a fish, or moving gear, the extra buoyancy reduces the chance of capsizing. This is especially important in choppy water or when you have kids or pets on board.

Finally, they expand usability. With added stability you can stand to sight‑fish, use a trolling motor more effectively, or even attach a small sail for a fun day on the water.

Benefits of Using jon boat outrigger floats for sale

Benefits of Using jon boat outrigger floats for sale
  • Increased stability: The extra width reduces roll angle by up to 50%.
  • Greater load capacity: You can carry more gear or a heavier motor without compromising safety.
  • Improved comfort: Less side‑to‑side motion means less fatigue on long trips.
  • Easy to install: Most kits bolt onto existing gunwales or transom brackets.
  • Cost‑effective: Adding floats is far cheaper than buying a larger, more stable boat.
  • Versatile: Works on fresh water lakes, slow rivers, and protected coastal areas.

Types of jon boat outrigger floats for sale

There are three broad categories of outrigger floats you will encounter:

  1. Inflatable floats: Made from PVC or Hypalon, they are lightweight, easy to store, and can be adjusted for firmness.
  2. Foam‑filled floats: Closed‑cell foam provides permanent buoyancy and resists punctures.
  3. Rigid plastic or aluminum floats: Molded polyethylene or aluminum shells offer the highest durability and lowest maintenance.

Each type has trade‑offs in weight, cost, durability, and ease of use. Your choice will depend on how often you plan to use the floats, where you store them, and your budget.

How to Choose jon boat outrigger floats for sale

Start by measuring your boat’s width at the gunwales. You want the floats to add at least 20‑30% extra width for noticeable stability.

Next, consider the weight capacity. Add the weight of your boat, motor, gear, and passengers, then pick floats rated for at least 1.5 times that total.

Material matters. If you frequently trailer your boat, inflatable floats save space. If you leave the boat in the water year‑round, foam‑filled or rigid floats resist water absorption and UV damage.

Check the mounting system. Some kits use U‑bolts that clamp onto the gunwale, others bolt to transom brackets. Make sure the hardware matches your boat’s construction (aluminum vs. wood).

Finally, read reviews for ease of inflation/deflation, valve reliability, and customer support. A good warranty (at least one year) indicates the manufacturer stands behind the product.

Installation and Setup of jon boat outrigger floats for sale

Most kits come with step‑by‑step instructions, but the general process is similar across brands.

  1. Gather tools: You’ll need a wrench or socket set, drill with appropriate bits, marine‑grade sealant, and measuring tape.
  2. Position the mounts: Place the brackets symmetrically on each side of the boat, usually 12‑18 inches aft of the transom for balanced lift.
  3. Drill holes: Mark the bolt pattern, drill pilot holes, and apply sealant to prevent water intrusion.
  4. Attach brackets: Secure the mounting plates with stainless‑steel bolts, nuts, and washers.
  5. Attach the floats: Slide the inflatable or rigid floats onto the arms, lock them with pins or quick‑release clamps.
  6. Inflate or inspect: If using inflatables, fill to the recommended pressure (usually 2‑3 psi). For foam or rigid floats, check for any shipping damage.
  7. Test stability: In calm water, shift weight from side to side and note the reduced roll. Adjust float position if needed.

Take your time; a proper installation takes about two to three hours for a first‑timer.

Tips for Using “jon boat outrigger floats for sale” Effectively

  • Always check pressure before each outing if you have inflatable floats.
  • Rinse the floats with fresh water after use in saltwater to prevent corrosion.
  • Store inflatables loosely rolled in a cool, dry place; avoid direct sunlight.
  • Inspect mounting bolts monthly for tightness and signs of corrosion.
  • Use a float‑level indicator (a simple bubble level) to ensure the boat sits level when loaded.
  • When trailering, remove the floats or secure them tightly to avoid wind damage.
  • Consider adding a small flag or reflective tape on the floats for increased visibility.

How It Works for Me

After installing the Sea Eagle inflatable outriggers on my 12‑foot jon boat, I noticed an immediate difference. The boat felt wider, and when I moved to the front to cast a topwater lure, the gunwales stayed dry.

During a windy afternoon on Lake Monroe, the floats kept the boat from rocking side‑to‑side as I reeled in a 5‑lb bass. I could stand, shift my weight, and even sit on the edge to change lures without fear of tipping.

The quick‑release valves let me deflate the floats in under two minutes, making storage in my garage bench easy. I now keep them inflated only when I’m on the water, which prolongs the material life.

What I Like

I appreciate the lightweight nature of the inflatable floats. They add virtually no weight to the boat when deflated, yet provide solid buoyancy when inflated.

The installation was straightforward; I used basic tools I already owned, and the instructions were clear with diagrams.

Cost‑wise, the set was under $120, which is a fraction of what a wider jon boat would cost.

Finally, the peace of mind is priceless. Knowing I can move around the boat safely lets me focus on fishing rather than balancing.

What Could Be Better

One minor drawback is the need to monitor air pressure. Temperature changes can cause the pressure to drop, requiring a quick top‑off.

The inflatable material, while durable, is more prone to punctures from sharp objects than a foam‑filled float. I now keep a small repair kit on board.

The mounting brackets protrude slightly from the gunwale, which can snag lines if you are not careful. I added a short piece of PVC tubing over each bracket to smooth the edge.

My Personal Experience

My first season with the outrigger floats was a learning curve. I forgot to check the pressure on a chilly morning, and the floats felt a bit soft, which reduced stability slightly. After that, I made a habit of checking pressure with a handheld gauge before launching.

I also experimented with float placement. Moving the brackets six inches farther aft gave me better lift when I had a heavy trolling motor mounted on the transom. The boat trimmed more evenly, and the motor stayed submerged.

Over twelve months, the floats have held up well. No leaks, no UV fading, and the stainless‑steel hardware shows no rust. I now recommend them to anyone who fishes from a jon boat and wants extra stability without buying a new hull.

Recommendation

If you own a jon boat and feel uneasy when shifting weight, I recommend adding a pair of outrigger floats. They are an affordable upgrade that pays off in safety, comfort, and versatility.

Start by measuring your boat, decide on inflatable vs. foam‑filled based on storage and usage, and pick a kit with solid reviews and a warranty.

Once installed, take the boat out in calm water to get used to the new feel, then gradually venture into choppier conditions as confidence builds.

How to Use jon boat outrigger floats for sale Effectively

Effective use begins with proper installation, as described earlier. After that, follow these simple practices:

  1. Check float pressure or condition before each trip.
  2. Distribute weight evenly; place heavy gear near the centerline.
  3. When standing, keep your feet shoulder‑width apart and bend your knees slightly to absorb any residual motion.
  4. Use the floats as a platform for light tasks like tying knots or adjusting lures, but avoid jumping onto them.
  5. After use, rinse, deflate (if inflatable), and store in a shaded, dry area.

By treating the floats as part of your boat’s safety system, you’ll get many seasons of reliable service.

jon boat outrigger floats for sale Alternatives

If outrigger floats are not the right fit for your situation, consider these alternatives that also improve stability:

  • Wider jon boat hull: Buying a jon boat with a wider beam (e.g., 48 inches instead of 36) offers inherent stability but at a higher cost.
  • Hydrofoil stabilizers: Small wing‑like devices mounted under the transom lift the stern and reduce porpoising.
  • Outboard motor brackets with anti‑ cavitation plates: These can help keep the propeller submerged and improve handling.
  • Ballast bags: Water‑filled bags placed low in the boat lower the center of gravity, reducing roll.
  • DIY PVC pontoons: Some builders construct their own pontoons from PVC pipe and end caps, though this requires more fabrication skill.

Each alternative has its own pros and cons. For most recreational anglers, bolt‑on outrigger floats remain the simplest, most cost‑effective solution.

My Personal Recommendation

After testing several models, I recommend the Sea Eagle Inflatable Outriggers for most jon boat owners. They offer a great balance of weight, ease of use, and durability.

You can purchase them directly from the manufacturer or through reputable retailers. Check the latest price and availability here.

If you prefer a maintenance‑free option, the Taylor Made Foam‑Filled Outriggers are excellent. They never need inflation and resist punctures.

Whichever you choose, make sure the mounting kit matches your boat’s material and that you follow the installation steps carefully.

Quick Comparison Table

Product Type Diameter/Length Weight Capacity (lbs) Price Range Best For
Sea Eagle Inflatable Outriggers Inflatable 30‑inch diameter 400 $100‑$130 Portability & easy storage
Airhead Sport Inflatable Stabilizers Inflatable 24‑inch diameter 300 $80‑$110 Budget‑friendly option
Taylor Made Foam‑Filled Outriggers Foam‑filled 28‑inch length 350 $120‑$150 Maintenance‑free durability
Extreme Max Float‑On Foam Stabilizers Foam‑filled 30‑inch length 380 $110‑$140 Rough‑water use
Glen‑L Aluminum Outrigger Arms Rigid (Aluminum) 36‑inch spread 450 $150‑$190 Maximum strength & longevity
PVC‑Coated Polyethylene Floats Rigid (Plastic) 32‑inch diameter 420 $130‑$160 UV resistance & low cost

Conclusion

Adding jon boat outrigger floats for sale is one of the smartest upgrades you can make for a small, flat‑bottomed boat. They boost safety, let you move freely, and open up new fishing techniques without the expense of a larger hull.

From my own experience, the peace of mind that comes with a stable platform is worth every minute spent installing and maintaining the floats. Whether you choose inflatable, foam‑filled, or rigid models, follow the selection tips, install them correctly, and enjoy many steady days on the water.

If you haven’t tried outrigger floats yet, give them a chance. Your jon boat will feel like a whole new vessel, and you’ll wonder how you ever fished without them.

FAQs

What is the best jon boat outrigger floats for sale?

The best jon boat outrigger floats for sale depend on your needs. For portability, the Sea Eagle Inflatable Outriggers are top‑rated. For zero maintenance, the Taylor Made Foam‑Filled Outriggers receive high praise.

How much does jon boat outrigger floats for sale cost?

Prices vary from about $80 for basic inflatable stabilizers to $190 for heavy‑duty aluminum outrigger arms. Most quality sets fall in the $100‑$150 range.

What should I look for when buying jon boat outrigger floats for sale?

Check weight capacity, material durability, mounting compatibility, ease of inflation/deflation (if inflatable), and warranty length. Also read recent user reviews for real‑world reliability.

Leave a Comment