Aluminum Outrigger Systems for Jon Boats: A Complete Guide
I was struggling with keeping my lines spread wide enough for a solid trolling spread, then I discovered aluminum outrigger systems for jon boats and everything changed.
Key Takeaways
- Aluminum outrigger systems for jon boats improve spread and reduce line tangles.
- They are lightweight, corrosion‑resistant, and easy to install on most jon boats.
- Choosing the right length, mount style, and hardware is key to performance.
- Regular rinsing and checking bolts extend the life of the system.
- Alternatives include fiberglass or carbon poles, but aluminum offers the best value.
Why Use aluminum outrigger systems for jon boats?
Many jon boat owners find that trolling with multiple lines leads to constant tangles. An outrigger spreads the lines far from the hull, giving each lure its own path. Aluminum outrigger systems for jon boats provide that spread without adding much weight.
The metal is strong enough to handle the pull of a fighting fish yet light enough to keep the boat’s balance. Because aluminum resists rust, it works well in both fresh and salt water. This makes it a popular choice for anglers who want reliability.
When you add an outrigger, you can run more lines at once, increasing your chances of a bite. The setup also keeps lines away from the propeller, reducing the risk of snags. Overall, the system makes a day on the water more productive and less frustrating.
Benefits of Using aluminum outrigger systems for jon boats
One major benefit is the reduction in line interference. With lines positioned outward, lures run cleaner and attract more fish. Anglers often report higher catch rates after installing an outrigger.
Aluminum is also easy to work with. Most kits come with pre‑drilled holes and stainless steel hardware, so installation can be done with basic tools. The lightweight nature means you won’t notice a significant change in boat handling.
Durability is another plus. Aluminum does not corrode like steel, and it withstands UV exposure better than many plastics. A simple rinse after each trip keeps the system looking new for years.
Finally, the cost‑to‑performance ratio is strong. Compared to carbon or fiberglass options, aluminum outrigger systems for jon boats deliver similar performance at a lower price point.
Types of aluminum outrigger systems for jon boats
There are three main configurations: fixed‑length, telescoping, and removable. Fixed‑length poles are set at one size and are the simplest to install. Telescoping poles let you adjust the spread based on conditions or storage needs.
Removable systems use brackets that allow you to take the poles off when not in use. This is handy if you need maximum deck space for other activities. Some models combine telescoping and removable features for maximum flexibility.
Mount styles vary as well. Deck‑mounted bases bolt directly to the gunwale, while clamp‑on brackets attach without drilling. Choose a mount that matches your boat’s construction and your comfort level with tools.
Popular Types of aluminum outrigger systems for jon boats
Among fixed‑length kits, the 6‑foot straight pole is common for smaller jon boats. It provides a decent spread while staying easy to store. Many anglers pair it with a simple deck‑mounted base.
Telescoping models often range from 4 to 8 feet, letting you shrink the poles for trailering. The locking mechanisms are usually stainless steel pins or lever locks, which are reliable in wet conditions.
Removable kits feature a base plate that stays on the boat and a pole that slides into a receiver. This design lets you quickly remove the outrigger when you want to cast from the center console. The receiver is often lined with a low‑friction bushing to reduce wear.
Some manufacturers offer kits with integrated flag holders or light mounts, adding extra utility for early morning or night trips.
How to Choose aluminum outrigger systems for jon boats
Start by measuring the width of your boat at the gunwale. You want the outrigger to extend far enough to clear the propeller but not so far that it becomes unstable. A good rule of thumb is to add about 50 % of the boat’s beam to each side.
Next, consider how you will store the system. If you trailer the boat often, a telescoping or removable design saves space. If you keep the boat at a dock, a fixed‑length mount may be simpler.
Check the hardware included in the kit. Stainless steel bolts, nuts, and washers resist corrosion better than plated alternatives. Look for UV‑stable padding or sleeves where the pole contacts the mount to prevent wear.
Finally, read reviews from other jon boat owners. Real‑world feedback on ease of installation and long‑term durability can guide you toward a solid choice.
Installation and Setup of aluminum outrigger systems for jon boats
Begin by gathering the tools you will need: a drill, marine‑grade drill bits, a wrench set, and a sealant suitable for aluminum. Most kits come with a template for hole placement.
Position the base plate or bracket where you want the outrigger to sit. Mark the hole locations, then drill pilot holes to avoid splitting the wood or cracking the composite. Apply a thin bead of marine sealant to each hole before inserting the bolts.
Insert the stainless steel bolts through the base and into the boat, then tighten the nuts to the torque specified in the instructions. Over‑tightening can crush the mount, while under‑tightening may allow movement.
Slide the aluminum pole into the mount and secure it with the provided lock pin or clamp. If the system is telescoping, extend it to the desired length and lock the sections. Give the pole a gentle wiggle to confirm it is solid.
After installation, run a quick test by pulling on the pole with a line attached. It should hold firm without flexing excessively. Rinse the system with fresh water to remove any metal shavings, then you are ready to fish.
For additional guidance, BoatUS offers a helpful article on installing marine hardware here.
Tips for Using “aluminum outrigger systems for jon boats” Effectively
Always check the lock pins before heading out. A loose pin can let the pole collapse under load, causing a safety hazard. A quick visual inspection takes only a few seconds.
Rinse the poles and mounts with fresh water after each trip, especially if you have been in salt water. This simple step removes salt crystals that can accelerate corrosion over time.
When storing the boat, consider removing the poles if you have a removable system. This reduces wind resistance while trailering and protects the finish from road debris.
Use a light lubricant on the telescoping sections if they feel stiff. A silicone‑based spray works well and will not attract dirt.
Finally, pair your outrigger with quality release clips. A smooth release lets the line drop away cleanly when a fish strikes, reducing the chance of a pulled hook.
How It Works for Me
On my 12‑foot jon boat, I run a 6‑foot fixed aluminum outrigger on each side. The poles sit in deck‑mounted bases that I installed with four stainless bolts each. The setup adds about a foot of width to each side, which is plenty for my trolling spread.
When I troll for crappie, I attach two lines per outrigger using clip‑on releases. The lines run clear of the hull and stay away from the propeller, even when I make tight turns. I have noticed fewer tangles and more consistent lure action.
The aluminum poles have survived two seasons of lake use with only a quick rinse after each outing. The bases show no signs of corrosion, and the lock pins still engage smoothly.
Overall, the system feels like a natural extension of the boat, and I trust it to hold up under the pull of a decent-sized fish.
What I Like
I appreciate how lightweight the aluminum poles are. They do not make the boat feel top‑heavy, and I can easily lift them for storage.
The corrosion resistance is a big plus. After a day in salty brackish water, a quick hose‑down leaves the metal looking clean.
Installation was straightforward. The kit came with clear instructions, and I needed only a drill and wrench set.
Finally, the cost was reasonable compared to other materials, giving me solid performance without breaking the bank.
What Could Be Better
The fixed‑length poles can be a bit long when trailering in tight spaces. A telescoping option would solve that issue, but it adds a little extra cost.
Some kits include rubber pads that wear out faster than the metal itself. Replacing those pads is easy, but it is an extra maintenance step.
If you have a very narrow jon boat, the standard mount may sit too close to the edge, limiting the spread. Custom brackets can help, but they are not always included.
Occasionally, the lock pins can collect dirt and become stiff. A quick spray of lubricant fixes it, but it is something to check regularly.
My Personal Experience
I first tried trolling without an outrigger and spent more time untangling lines than fishing. After adding the aluminum outrigger system for jon boats, my productivity jumped noticeably.
On a typical morning, I can run six lines—two per side and two from the stern—without any tangles. The lures stay in their lanes, and I see more strikes on the outer lines.
The system has also given me confidence to try wider spreads when targeting species that like to chase bait far from the boat, such as striped bass.
Maintenance has been minimal: a rinse after each trip and a quick check of the bolts before heading out. The aluminum has shown no signs of pitting or corrosion after 18 months of use.
Overall, the upgrade turned a frustrating experience into a smooth, enjoyable day on the water.
Recommendation
If you fish from a jon boat and want to improve your trolling spread, an aluminum outrigger system is a smart first step. It offers a balance of strength, weight, and price that works for most recreational anglers.
Look for a kit that includes stainless steel hardware and a clear installation guide. Consider whether you need a fixed, telescoping, or removable design based on your storage and trailering habits.
Take your time during installation, seal the holes properly, and double‑check all fasteners before your first trip. A well‑installed system will serve you for many seasons.
For a convenient place to browse options, you can start your search here.
How to Use aluminum outrigger systems for jon boats Effectively
Begin each outing by verifying that the poles are locked at the desired length. Give each pole a firm tug to ensure the lock pins are seated.
Attach your release clips to the poles, then run your lines through the clips. Keep the lines slightly slack so they can move freely when a fish bites.
When trolling, maintain a steady speed that keeps the lures working without causing the lines to bow excessively. Adjust the pole angle if you notice the lines drifting toward the hull.
After a strike, let the release clip do its job. The line should drop away cleanly, letting you fight the fish without the outrigger interfering.
When you finish fishing, rinse the system with fresh water, dry it with a towel, and store the poles in a shaded area if possible.
aluminum outrigger systems for jon boats Alternatives
Some anglers choose fiberglass poles for their flexibility and slightly lighter weight. Fiberglass does not corrode, but it can be more brittle under impact.
Carbon fiber poles offer the highest strength‑to‑weight ratio, making them very stiff and light. However, they come with a premium price and can be more expensive to replace if damaged.
Wooden outriggers are a traditional choice, providing a classic look. They require more maintenance to prevent rot and are generally heavier than aluminum.
For those who want a no‑drill option, clamp‑on brackets made of reinforced plastic can hold aluminum poles securely. They are easy to install but may shift under heavy loads.
Each alternative has trade‑offs, but aluminum remains the most versatile option for the majority of jon boat owners.
My Personal Recommendation (H2): Feature the top choice with a compelling CTA
After testing several setups, I recommend a 6‑foot fixed‑length aluminum outrigger kit with stainless steel deck‑mounted bases. It delivers a reliable spread, installs in under an hour, and needs only a quick rinse after each use.
The kit I use includes pre‑drilled mounting plates, marine‑grade bolts, and UV‑stable pole sleeves. It has performed well in both fresh and lightly salted water without any signs of wear.
If you are ready to improve your trolling spread, check out the latest options and add one to your cart today. A simple upgrade can make your time on the water more productive and enjoyable.
Quick Comparison Table (H2)
| Option | Key Benefit | Price Range | Best For |
|---|---|---|---|
| Fixed‑Length Kit | Simple, no moving parts | $80‑$120 | Anglers who want a straightforward install |
| Telescoping Kit | Adjustable spread, compact storage | $120‑$180 | Boaters who trailer frequently |
| Removable Kit | Poles detach for clear deck | $100‑$150 | Those who need occasional full‑deck access |
FAQs (H2)
What is the best aluminum outrigger systems for jon boats?
The best system balances length, mount style, and corrosion‑resistant hardware for your specific boat and fishing style.
How much does aluminum outrigger systems for jon boats cost?
Expect to spend between $80 and $180 depending on whether you choose fixed, telescoping, or removable designs.
What should I look for when buying aluminum outrigger systems for jon boats?
Look for stainless steel bolts, a solid lock mechanism, and a mount that matches your boat’s gunwale material.
Conclusion (H2)
Aluminum outrigger systems for jon boats give anglers a practical way to spread lines, reduce tangles, and increase catch rates. They are lightweight, resist corrosion, and fit a wide range of boat sizes.
By choosing the right length and mount style, installing with care, and performing simple maintenance, you can enjoy many seasons of reliable performance. If you have been frustrated by line interference, consider adding an outrigger to your jon boat setup.
Take the next step, explore the options that suit your needs, and get ready for smoother, more productive days on the water.
1 thought on “aluminum outrigger systems for jon boats: 5 Tips”