We need to produce HTML with the locked tokens exactly as they appear. The user gave a template with many __WU_LOCKED_xxxx__ tokens. We need to keep them exactly, and rewrite the normal prose between them according to the humanization passes.
We must not alter the tokens. The content we need to output must preserve the token order.
We need to produce the final HTML with the tokens unchanged, and the prose between them rewritten per the master edit.
We need to read the locked tokens to understand the structure. The user gave a long snippet with many tokens. We need to output exactly same tokens, but replace the prose between them with our humanized article.
Thus we need to parse the given input to see where the tokens are and what prose exists between them (maybe some placeholder text). Then we replace that prose with our humanized article, but keep tokens unchanged.
Given the massive number of tokens, it’s likely the user provided a skeleton where tokens mark places like title, headings, tables, etc. We need to fill in the content.
But the instruction: “Return clean HTML only. Preserve protected HTML, links, images, design elements, metadata comments, facts, and structure exactly.” So we must not change any token.
Thus we need to output exactly the same sequence of tokens, but with the prose between them replaced by our humanized article.
We need to identify the prose sections (the parts not wrapped in __WU_LOCKED_…__). In the user message, there is a block:
We need to produce HTML only, with the required sections. Focus keyword: “how to improve jon boat stability“. Must follow readability target Flesch-Kincaid 95+ (very easy). Use simple words, short sentences. Must include meta description, SEO title, feature image prompt, word count comment.
We must not use markdown fences. Use plain HTML tags.
We need to ensure readability is high: short sentences, simple words. We’ll aim for sentences under ~12 words, average lower.
We need to include the focus keyword in title, first 100 words, at least one H2/H3 heading.
We need to include a table of contents linking to H2 sections.
We need a tools table.
We need step-by-step guide with 5-8 steps, each as H2 or H3 step headings.
We need common mistakes & troubleshooting H2.
We need FAQ H2.
We need final thoughts.
We need meta description 120-140 characters.
We need SEO title ~50-60 characters.
We need feature image prompt comment.
We need word count comment.
We need content ideas comment block at end with informational and commercial keywords (new article keywords not repeating focus keyword). Provide some suggestions.
We must not include any markdown fences. Use HTML only.
Let’s craft.
First, decide title: “How to Improve Jon Boat Stability: Easy Step-by-Step Guide”. Count characters: Let’s count: “How to Improve Jon Boat Stability: Easy Step-by-Step Guide”. Count: H(1)o2w3 space4t5o6 space7I8m9p10r11o12v13e14 space15J16o17n18 space19B20o21a22t23 space24S25t26a27b28i29l30i31t32y33:34 space35E36a37s38y39 space40S41t42e43p44-45b46y47-48S49t50e51p52 space53G54u55i56d57e58. That’s 58 characters. Good.
SEO title comment:
Meta description: need 120-140 characters. Let’s craft: “Learn simple steps to improve jon boat stability with easy tips, tools, and safety checks for a smoother, safer ride on the water.” Count characters: Let’s count precisely.
“Learn simple steps to improve jon boat stability with easy tips, tools, and safety checks for a smoother, safer ride on the water.”
Count characters including spaces and punctuation.
I’ll count: L1 e2 a3 r4 n5 (space6) s7 i8 m9 p10 l11 e12 (space13) s14 t15 e16 p17 s18 (space19) t20 o21 (space22) i23 m24 p25 r26 o27 v28 e29 (space30) j31 o32 n33 (space34) b35 o36 a37 t38 (space39) s40 t41 a42 b43 i44 l45 i46 t47 y48 (space49) w50 i51 t52 h53 (space54) e55 a56 s57 y58 (space59) t60 i61 p62 s63 ,64 (space65) t66 o67 o68 l69 s70 ,71 (space72) a73 n74 d75 (space76) s77 a78 f79 e80 t81 y82 (space83) c84 h85 e86 c87 k88 s89 (space90) f91 o92 r93 (space94) a95 (space96) s97 m98 o99 o100 t101 h102 e103 r104 ,105 (space106) s107 a108 f109 e110 r111 (space112) r113 i114 d115 e116 (space117) o118 n119 (space120) w121 a122 t123 e124 r125 .126
So 126 characters. Good within 120-140.
Now feature image prompt: need description of a specific action/step. Let’s pick “installing foam flotation pods on the jon boat hull”. We’ll craft.
Now content ideas: need informational and commercial keywords (new). Provide some like “how to add foam flotation to jon boat”, “best jon boat stabilizer kits”, “jon boat weight distribution tips”, “DIY jon boat outriggers”, “jon boat stability accessories review”. Ensure they are not repeating focus keyword.
Now produce HTML.
We need H1 title? Probably
How to Improve Jon Boat Stability: Easy Step-by-Step Guide
How to Improve Jon Boat Stability
Then Table of Contents linking to H2 sections: we can create a nav with links.
We need H2 sections: Before You Start: Tools, Gear & Preparation (maybe as H2), The Step-by-Step Guide (maybe as H2 with substeps as H3?), Common Mistakes & Troubleshooting (H2), Frequently Asked Questions About How to Improve Jon Boat Stability (H2), Final Thoughts (H2).
But we need step headings as H2 or H3. We can make each step an H3 under a H2 “The Step-by-Step Guide”. Or we can make each step H2 directly. Simpler: each step as H2.
We’ll need to keep readability: short sentences, simple words.
Let’s outline steps:
Step 1: Check the boat and calm water
Step 2: Measure and mark where to add flotation
Step 3: Clean the hull area
Step 4: Attach foam flotation pods or buoyant blocks
Step 5: Secure with marine-grade adhesive and bolts
Step 6: Test stability by gently rocking
Step 7: Adjust weight distribution if needed
Step 8: Final safety check and launch
That’s 8 steps.
Now we need tools table: Item/Tool | Purpose | Optional/Required.
List: Measuring tape, Marker, Sandpaper or grit pad, Marine epoxy or adhesive, Foam flotation pods (or buoyant blocks), Stainless steel bolts and nuts, Wrench set, Safety gloves, Eye protection, Clean rag.
Now we need to embed focus keyword in first 100 words. We’ll start intro with that phrase.
Intro 100-140 words. Let’s craft ~120 words.
Intro:
“How to improve jon boat stability is a common question for anglers and hunters who want a steadier platform. A stable jon boat lets you cast, reel, and move gear without tipping. In this guide you will learn easy steps to add flotation, balance weight, and check safety. Estimated time: about two hours. Difficulty: easy. Primary objective: make your jon boat steadier on calm water and light chop. Let’s gather the tools and get started.”
Now count words roughly: Let’s count.
“How(1) to2 improve3 jon4 boat5 stability6 is7 a8 common9 question10 for11 anglers12 and13 hunters14 who15 want16 a17 steadier18 platform.19 A20 stable21 jon22 boat23 lets24 you25 cast,26 reel,27 and28 move29 gear30 without31 tipping.32 In33 this34 guide35 you36 will37 learn38 easy39 steps40 to41 add42 flotation,43 balance44 weight,45 and46 check47 safety.48 Estimated49 time:50 about51 two52 hours.53 Difficulty:54 easy.55 Primary56 objective:57 make58 your59 jon60 boat61 steadier62 on63 calm64 water65 and66 light67 chop.68 Let’s69 gather70 the71 tools72 and73 get74 started75.”
75 words. Need 100-140 words. Let’s add more sentences.
Add: “You will need only basic hand tools and a few marine supplies. The process works on most flat‑bottom jon boats made of aluminum or fiberglass. Follow each step carefully, and you will notice a firmer feel right away.”
Add those words.
Now count added: “You1 will2 need3 only4 basic5 hand6 tools7 and8 a9 few10 marine11 supplies.12 The13 process14 works15 on16 most17 flat‑bottom18 jon19 boats20 made21 of22 aluminum23 or24 fiberglass.25 Follow26 each27 step28 carefully,29 and30 you31 will32 notice33 a34 firmer35 feel36 right37 away38.”
38 words. Total now 75+38=113 words. Good within 100-140.
Now after intro, we need a transition to setup. We’ll add a short line: “First, gather your gear and prepare the boat.” That’s fine.
Now Before You Start: Tools, Gear & Preparation H2.
We’ll create a table using HTML
. Use and .
Now step-by-step guide: each step as H3 maybe under H2 “The Step-by-Step Guide”. But we can just use H2 for each step; easier for TOC.
We need to keep readability: short sentences, simple words.
We’ll write each step with 3-5 short paragraphs, each paragraph 2-4 lines (i.e., short sentences). Use bold for key tools or safety alerts.
We need to include direct conversational questions.
We need pro-tips in callout blocks: we can use
Captain’s Note: …
.
Now common mistakes & troubleshooting H2.
FAQ H2: 3-5 questions.
Final thoughts H2.
After content, we need the HTML comments: SEO_TITLE, META_DESCRIPTION, FEATURE_IMAGE_PROMPT, WORD_COUNT, CONTENT_IDEAS.
We need to compute word count roughly. Let’s approximate. We’ll aim for ~1500 words? Actually target 1500-3000 words. But with high readability, maybe 1200 words is okay? The instruction says target about 1500-3000 words. We’ll try to hit ~1800 words.
We need to count words. That’s tedious but we can approximate and then put a placeholder? The WORD_COUNT comment must be accurate? Likely they expect actual count. We’ll try to approximate and maybe slightly over/under but okay.
Given time, we can produce ~1800 words. Let’s attempt to write fairly detailed but with short sentences.
We’ll need to be careful to keep sentences short (<12 words). Use many short sentences.
Let's draft.
We'll start with HTML skeleton.
How to Improve Jon Boat Stability: Easy Step-by-Step Guide
How to Improve Jon Boat Stability: Easy Step-by-Step Guide
Before You Start: Tools, Gear & Preparation
Item / Tool
Purpose
Optional / Required
Measuring tape
Find exact spots for flotation
Required
Marker or chalk
Mark the hull
Required
Sandpaper or grit pad
Roughen surface for glue
Required
Marine epoxy or adhesive
Bond flotation pods
Required
Foam flotation pods or buoyant blocks
Add lift to hull
Required
Stainless steel bolts and nuts
Mechanical hold
Required
Wrench set
Tighten bolts
Required
Safety gloves
Protect hands
Required
Eye protection
Shield eyes from debris
Required
Clean rag
Wipe dust and oil
Required
Make sure the boat is on a flat trailer or shore. Disconnect any battery if you will work near wires. Choose a calm day with little wind.
Before You Start: Tools, Gear & Preparation
Step 1: Inspect the Boat and Water
Look over the hull for cracks, dents, or loose rivets. Fix any damage before adding weight.
Step 1: Inspect the Boat and Water
Ask yourself: Does the boat sit level on the trailer? If one side is low, note it.
Check the water where you will test. It should be flat, with no waves or strong current.
Captain’s Note: A quick visual check saves time later and keeps you safe.
Step 2: Measure and Mark Flotation Spots
Measure the length of the boat from bow to stern. Divide that length into three equal parts.
Step 2: Measure and Mark Flotation Spots
Mark the forward third and the aft third on each side of the hull. These are the best spots for pods.
Use a marker that can be wiped off later. Make the marks about two inches wide.
Ask: Are the marks clear and easy to see?
Step 3: Clean the Hull Area
Sand the marked spots until the surface feels rough. This helps the adhesive grip.
Wipe away dust with a clean rag. Ensure no oil or grease remains.
Put on gloves and eye protection before you start sanding.
Captain’s Note: A clean bond means the pods will stay put for years.
Step 4: Attach Flotation Pods
Apply a thick bead of marine epoxy to the back of each foam pod. Press the pod firmly onto the hull at the marked spot.
Hold it in place for a few minutes until the adhesive begins to set.
Repeat for all four pods (two front, two rear).
Ask: Does each pod sit flat against the hull without gaps?
Step 5: Secure with Adhesive and Bolts
While the epoxy cures, drill small pilot holes through the pod flange into the hull.
Insert stainless steel bolts and tighten with a wrench. Do not over‑tighten; you just need a snug fit.
Add a second layer of epoxy around the bolt heads for extra water‑tightness.
Captain’s Note: Bolts give mechanical strength; epoxy seals against water.
Step 6: Test Stability Gently
Launch the boat in calm water. Stand at the center and shift your weight side to side.
Feel for any wobble. The boat should feel firmer and resist tipping.
If you notice excess flex, check that all bolts are tight.
Ask: Does the boat feel steadier than before?
Step 7: Adjust Weight Distribution
Move heavy gear (like a cooler or battery) toward the center of the boat.
Keep the load low and balanced port‑starboard.
Re‑test the stability after each shift.
Captain’s Note: Proper weight placement works hand‑in‑hand with added flotation.
Step 8: Final Safety Check
Inspect all bolts and epoxy seams. Look for any cracks or loose fittings.
Make sure your personal flotation device is aboard and accessible.
Take a short trip to confirm the boat handles well at low speed.
When everything feels solid, you are ready for a day on the water.
Common Mistakes & Troubleshooting
Problem: Pods come loose after a few trips
Cause: Adhesive not cured or surface not rough enough.
Problem: Boat still feels tippy
Cause: Weight too far aft or forward, or pods too small.
Problem: Water leaks around bolt holes
Cause: Bolt not sealed or hole too big.
Frequently Asked Questions About How to Improve Jon Boat Stability
What size flotation pods should I use?
Choose pods that add about 5 to 10 pounds of lift per side. For a 12‑foot jon boat, two 6‑inch diameter pods work well.
Can I use PVC pipes instead of foam?
Yes, sealed PVC pipes filled with foam or air can act as flotation. Just make sure they are watertight and securely attached.
How often should I check the bolts and epoxy?
Inspect before each outing and after any hard impact. Re‑tighten bolts and touch up epoxy if you see wear.
Is it safe to add flotation to an aluminum jon boat?
Absolutely. Marine epoxy bonds well to aluminum when the surface is properly prepared.
Do I need to register the boat after adding flotation?
No. Adding internal flotation does not change the hull registration number or requirements.
Final Thoughts
You now know how to improve jon boat stability with simple tools and a few hours of work. A steadier boat means safer fishing, easier gear handling, and more fun on the water.
Get out there, try the steps, and enjoy the difference. Remember to check your work each time you head out.
Now we need to verify that the focus keyword appears in the first 100 words (we have it in intro). Also appears in at least one H2/H3 heading. We have the focus keyword not exactly in any heading; we used “How to Improve Jon Boat Stability: Easy Step-by-Step Guide” as H1, which includes the focus keyword exactly? The focus keyword is “how to improve jon boat stability”. Our H1 is “How to Improve Jon Boat Stability: Easy Step-by-Step Guide”. That’s exactly the phrase (case variations). It includes the exact phrase. Good.
We need to use the exact Focus Keyword in at least ONE H2 or H3 heading. We have H1 but requirement says H2/H3. We could add an H2 that includes the phrase. Perhaps we can add an H2 like “How to Improve Jon Boat Stability: Overview”. But we already have H1; we could add an H2 with the phrase as well. Let’s add an H2 after the intro before the TOC? But TOC is after H1. Could add an H2 “How to Improve Jon Boat Stability: Overview” before the Before You Start section. That would satisfy.
We’ll add an H2 with the exact phrase.
Let’s insert after the intro and before the Table of Contents? Actually we have Table of Contents after H1. We’ll add an H2 “How to Improve Jon Boat Stability: Overview” with a short paragraph.
We must keep readability.
Let’s adjust.
After the
we will add:
How to Improve Jon Boat Stability: Overview
This guide shows easy steps to add flotation, balance weight, and test the boat. Follow each step for a steadier ride.
Then we keep the Table of Contents after that? But the TOC currently lists sections; we need to add an entry for Overview if we want. Not required but could.
Simplify: we can keep TOC as is and just add the H2 somewhere else, maybe after the intro before Before You Start. We’ll add the H2 and a short paragraph, then keep the TOC unchanged (it won’t link to that H2 but that’s okay). The requirement is just to have the keyword in at least one H2/H3. We’ll have that.
Now ensure we didn’t break anything else.
Now check keyword in feature image alt text: we need to include exact focus keyword in feature-image alt text. The feature image prompt comment is not alt text; we need to include alt text in an tag? The instructions: “Use the exact Focus Keyword in the feature-image alt text.” But we are not actually including an tag in the article; we only output a comment for the prompt. However the requirement likely expects that if we had an image, we’d include alt text. Since we are not displaying an image, maybe we can still include a dummy with alt text? The instruction says “Use the exact Focus Keyword in the feature-image alt text.” It might be expecting that we include an tag with alt attribute. But the earlier “IMAGE PROMPT CREATION” says to generate a custom AI image prompt at the end. The “INFORMATIONAL IMAGE CONTRACT” says we must create exactly one AI-generated feature image using the exact focus keyword; do not create a second fallback image. So we need to output an tag? Actually they said: “The application must create exactly one AI-generated feature image using the exact focus keyword; do not create a second fallback image.” In the output we need to provide the feature image prompt inside a comment. The alt text is for the image when used. Since we are not displaying an actual image, we might not need an tag. But the SEO gate says: “Use the exact Focus Keyword in the feature-image alt text.” So we should include an tag with alt text somewhere, maybe hidden? But they said “Return clean HTML only. No Markdown fences.” So we could include an tag with alt text and maybe style=”display:none;”? But that might be considered cheating. Better to include a visible placeholder? However we don’t have actual image URL. We cannot invent a URL. The instruction says: “NEVER invent a URL. If no trustworthy source URL is available, do not fabricate one.” So we cannot put a fake src.
Thus we cannot include an tag with a src. Perhaps we can omit the image and still satisfy the rule by having the alt text in the comment? But the rule explicitly says alt text. Might be lenient if we cannot provide src. However to be safe, we could include an tag with an empty src? That would be invalid.
Given the constraints, we might assume that the image will be generated elsewhere and the alt text will be set by the system using the prompt. So we just need to ensure the prompt includes the focus keyword? Actually the instruction: “Use the exact Focus Keyword in the feature-image alt text.” The alt text is separate from the prompt. But we cannot set alt without an image.
Given the difficulty, maybe we can include a with a that uses a placeholder like “data:image/svg+xml;base64,…”? That’s still a fabricated URL (data URL). Might be considered inventing? Probably not allowed.
Better to follow the instruction: we will not include an tag; we will rely on the comment for the prompt. The SEO self-check includes checking alt text, but we can’t verify. Might be okay.
Given the time, we will proceed.
Now check keyword in meta description: we have it.
Keyword in SEO title: we have.
Keyword in first 10%: yes.
Now we need to ensure readability: short sentences, simple words. We have many sentences that are short. Let’s verify a few.
We need to keep average sentence length low. We’ll try to keep each sentence under 12 words.
Let’s review some sentences:
Intro sentences:
“How to improve jon boat stability is a common question for anglers and hunters who want a steadier platform.” That’s long: let’s count words: How(1) to2 improve3 jon4 boat5 stability6 is7 a8 common9 question10 for11 anglers12 and13 hunters14 who15 want16 a17 steadier18 platform19. 19 words >12. Need to shorten.
We need to rewrite intro with short sentences.
Let’s rewrite intro completely with short sentences.
Goal: 100-140 words, simple.
We’ll write:
“How to improve jon boat stability is a common question. Anglers and hunters want a steadier platform. A stable jon boat lets you cast, reel, and move gear without tipping. In this guide you will learn easy steps. You will add flotation, balance weight, and check safety. Estimated time: about two hours. Difficulty: easy. Primary objective: make your jon boat steadier on calm water and light chop. Let’s gather the tools and get started.”
Now count words.
Sentence1: “How to improve jon boat stability is a common question.” Words: How1 to2 improve3 jon4 boat5 stability6 is7 a8 common9 question10. 10 words.
Sentence2: “Anglers and hunters want a steadier platform.” Anglers1 and2 hunters3 want4 a5 steadier6 platform7. 7 words.
Sentence3: “A stable jon boat lets you cast, reel, and move gear without tipping.” A1 stable2 jon3 boat4 lets5 you6 cast,7 reel,8 and9 move10 gear11 without12 tipping13. 13 words (slightly above 12 but okay maybe). Could split: “A stable jon boat lets you cast and reel. It lets you move gear without tipping.” Let’s do that.
Sentence3: “A stable jon boat lets you cast and reel.” Words: A1 stable2 jon3 boat4 lets5 you6 cast7 and8 reel9. 9 words.
Sentence4: “It lets you move gear without tipping.” It1 lets2 you3 move4 gear5 without6 tipping7. 7 words.
Sentence5: “In this guide you will learn easy steps.” In1 this2 guide3 you4 will5 learn6 easy7 steps8. 8 words.
Sentence6: “You will add flotation, balance weight, and check safety.” You1 will2 add3 flotation,4 balance5 weight,6 and7 check8 safety9. 9 words.
Sentence7: “Estimated time: about two hours.” Estimated1 time:2 about3 two4 hours5. 5 words.
Sentence8: “Difficulty: easy.” Difficulty:1 easy2. 2 words.
Sentence9: “Primary objective: make your jon boat steadier on calm water and light chop.” Primary1 objective:2 make3 your4 jon5 boat6 steadier7 on8 calm9 water10 and11 light12 chop13. 13 words (slightly over). Could split: “Primary objective: make your jon boat steadier. Use it on calm water and light chop.” Let’s do.
Sentence9: “Primary objective: make your jon boat steadier.” Primary1 objective:2 make3 your4 jon5 boat6 steadier7. 7 words.
Sentence10: “Use it on calm water and light chop.” Use1 it2 on3 calm4 water5 and6 light7 chop8. 8 words.
Sentence11: “Let’s gather the tools and get started.” Let’s1 gather2 the3 tools4 and5 get6 started7. 7 words.
Now total words: sum: 10+7+9+7+8+9+5+2+7+8+7 = 79? Let’s add: 10+7=17, +9=26, +7=33, +8=41, +9=50, +5=55, +2=57, +7=64, +8=72, +7=79. That’s only 79 words, need 100-140. We need more sentences.
Add more detail: talk about safety, tools, etc.
Add after sentence 11:
“You will need only basic hand tools and a few marine supplies. The process works on most flat‑bottom jon boats made of aluminum or fiberglass. Follow each step carefully, and you will notice a firmer feel right away.”
Now count these three sentences.
Sentence12: “You will need only basic hand tools and a few marine supplies.” You1 will2 need3 only4 basic5 hand6 tools7 and8 a9 few10 marine11 supplies12. 12 words.
Sentence13: “The process works on most flat‑bottom jon boats made of aluminum or fiberglass.” The1 process2 works3 on4 most5 flat‑bottom6 jon7 boats8 made9 of10 aluminum11 or12 fiberglass13. 13 words (slightly over). Could split: “The process works on most flat‑bottom jon boats. It works on aluminum or fiberglass hulls.” Let’s do.
Sentence13: “The process works on most flat‑bottom jon boats.” The1 process2 works3 on4 most5 flat‑bottom6 jon7 boats8. 8 words.
Sentence14: “It works on aluminum or fiberglass hulls.” It1 works2 on3 aluminum4 or5 fiberglass6 hulls7. 7 words.
Sentence15: “Follow each step carefully, and you will notice a firmer feel right away.” Follow1 each2 step3 carefully,4 and5 you6 will7 notice8 a9 firmer10 feel11 right12 away13. 13 words (slightly over). Could split: “Follow each step carefully. You will notice a firmer feel right away.” Let’s do.
Sentence15: “Follow each step carefully.” Follow1 each2 step3 carefully4. 4 words.
Sentence16: “You will notice a firmer feel right away.” You1 will2 notice3 a4 firmer5 feel6 right7 away8. 8 words.
Now total words: previous 79 + sentence12 12 = 91, +sentence13 8 =99, +sentence14 7 =106, +sentence15 4 =110, +sentence16 8 =118. Good within 100-140.
Now we have intro with short sentences.
Now we need to place the focus keyword in first 100 words: we have it in first sentence: “How to improve jon boat stability is a common question.” Good.
Now we need to ensure the focus keyword appears in at least one H2/H3 heading. We’ll add an H2 “How to Improve Jon Boat Stability: Overview”. That contains the exact phrase.
Now we need to check other headings for keyword stuffing: we must not overuse. We’ll use it only in H1 and that H2.
Now we need to check readability of rest of
SAFE STRUCTURE MODE: Every __WU_LOCKED_NNNNN__ token is a protected HTML tag or comment. Keep every token exactly once, in the exact same position and order. Never edit, remove, duplicate, or move these tokens. Rewrite only normal prose between tokens. Return the complete HTML with all tokens still present.