What tools and gear should I have on board to deal with flooding?

What tools and gear should I have on board to deal with flooding?

What tools and gear should I have on board to deal with flooding?

You’re out on the lake when water starts rising. What tools and gear should I have on board to deal with flooding? This guide covers the essential items you need. You’ll learn about pumps, plugs, alarms, and a complete flood kit. Keep reading to stay safe.

What tools and gear should I have on board to deal with flooding?

When water gets in, you need the right gear fast.

The essentials: a pump, plugs, an alarm, and a kit.

Do you have a bilge pump on your boat?

Electric pumps run on battery power. Manual pumps work by hand.

Soft wood plugs stop small holes. Rubber plugs seal bigger gaps.

A water alarm sounds when water rises.

Life jackets and a throw rope keep people safe.

A flood kit keeps all these items together in one bag.

Check your gear before each trip.

Pack smart and stay dry.

How do I pick the right bilge pump?

Choosing a pump starts with your boat’s size.

Small boats need a smaller pump. Larger boats need more capacity.

Ask yourself: How many gallons per hour do I need?

Look for a pump with a float switch.

A float switch turns the pump on automatically.

Make sure the pump voltage matches your battery.

Read reviews from other boaters.

Test the pump before you leave the dock.

Keep a spare fuse for the pump.

A good pump saves time and stress.

What size bilge pump do I need?

Pump size is measured in gallons per hour (GPH).

Match the pump to your boat length.

See the table below for quick reference.

Boat lengthPump size (GPH)
Under 20 ft500
20–30 ft1000
30–40 ft1500
Over 40 ft2000+

For boats under 20 feet, a 500 GPH pump works well.

For 20 to 30 feet, use a 1000 GPH pump.

For 30 to 40 feet, use a 1500 GPH pump.

For over 40 feet, go with 2000 GPH or more.

Two pumps give you backup.

Check the pump label for the GPH rating.

Pick the right size and you’ll move water fast.

How do I install a manual bilge pump?

A manual pump makes a solid backup.

Find a low spot in the bilge.

Drill a hole for the pump base.

Secure the pump with bolts.

Attach the hose to the pump outlet.

Run the hose overboard through a thru-hull fitting.

Seal the thru-hull with marine sealant.

Test the pump by working the handle.

Keep the handle within easy reach.

Practice pumping before you actually need it.

What are the best emergency plugs for hull leaks?

Leaks can happen at any time.

Soft wood plugs are a classic choice.

They swell when wet and seal the hole.

Rubber cone plugs fit many sizes.

Inflatable plugs work for larger gaps.

Carry a set of different sizes.

  • Wood plugs
  • Rubber cone plugs
  • Inflatable plugs

Leave a Comment