How to Store a Jon Boat Trailer Over Winter: 5 Tips

how to store a jon boat trailer over winter – Simple Tips

I was struggling with a rusty trailer and a cracked cover after last winter, then I discovered a few easy steps that kept my jon boat trailer safe all season long. Storing a jon boat trailer over winter doesn’t have to be a headache; it’s just a matter of protecting the frame, tires, and lights from snow, ice, and road salt. In this guide I’ll walk you through everything you need to know, from picking the right cover to checking the bearings before you launch again. Keep reading for simple, practical advice that will save you time and money.

Key Takeaways

how to store a jon boat trailer over winter — how to store a jon boat trailer over winter — Why Use how to store a jon
  • Proper winter storage prevents rust, tire damage, and electrical issues.
  • A good cover, jack stands, and occasional checks are all you need.
  • Indoor storage is best, but a well‑ventilated tarp works outdoors.
  • Inspect brakes, lights, and bearings before the first spring launch.
  • Simple DIY solutions can be just as effective as expensive kits.

Why Use how to store a jon boat trailer over winter?

how to store a jon boat trailer over winter — how to store a jon boat trailer over winter — Benefits of Using how to

Storing your jon boat trailer the right way keeps it ready for the next fishing trip. Snow and ice can sneak into small cracks and cause rust that weakens the frame. Road salt used on highways accelerates corrosion on bolts and bearings. If you leave the trailer sitting on bare ground, the tires can develop flat spots that ruin ride quality. By taking a few simple steps you protect your investment and avoid costly repairs later.

Another reason to store properly is safety. A trailer that has been neglected may develop weak spots in the axle or cracked welds. When you hitch it up again, those weaknesses could fail under load. A well‑maintained trailer also keeps your boat secure during transport, reducing the chance of shifting or damage on the road.

Finally, good storage habits save you time in the spring. Instead of spending a weekend scrubbing rust, repainting, and replacing tires, you can simply hook up and launch. That means more time on the water and less time in the garage.

Benefits of Using how to store a jon boat trailer over winter

how to store a jon boat trailer over winter — how to store a jon boat trailer over winter — Types of how to store a jon

The biggest benefit is extended lifespan. A trailer that stays dry and protected can last many years longer than one left out in the elements. You’ll also preserve the finish, keeping the paint and galvanization looking fresh.

Financial savings add up quickly. Replacing a rusted axle or buying new tires can cost hundreds of dollars. A simple cover and a set of jack stands cost far less and prevent those expenses.

Performance benefits are real too. Tires that stay round and bearings that stay lubricated give a smoother tow. Lights that stay corrosion‑free work reliably, which is important for early‑morning launches or late‑evening returns.

Lastly, peace of mind is a huge benefit. Knowing your trailer is safe and ready lets you focus on planning your next fishing adventure instead of worrying about hidden damage.

Types of how to store a jon boat trailer over winter

There are three main approaches: indoor storage, outdoor covered storage, and DIY makeshift solutions. Indoor storage means keeping the trailer inside a garage, shed, or dedicated storage unit. This offers the best protection from moisture, temperature swings, and pests.

Outdoor covered storage uses a tarp, boat cover, or purpose‑made trailer cover to shield the unit while it stays outside. The key is to allow airflow so condensation doesn’t get trapped under the cover.

DIY solutions combine everyday items like wooden pallets, cinder blocks, and rope to create a raised platform and a simple shelter. These methods are cheap and can be customized to fit your space.

Among boaters, the most popular choice is a heavy‑duty polyethylene tarp secured with bungee cords or ratchet straps. It’s inexpensive, lightweight, and easy to remove when you need to inspect the trailer.

Another favorite is a custom‑fit trailer cover made from UV‑protected canvas. These covers often have built‑in vents and reinforced corners, which help prevent wind damage and mildew.

For those with a garage, a set of adjustable jack stands paired with a floor mat is common. The stands lift the tires off the concrete, preventing flat spots, while the mat catches any drips.

Some anglers invest in a small metal storage shed specifically designed for trailers. These sheds lock, have ventilation panels, and can be anchored to the ground for extra security.

How to Choose how to store a jon boat trailer over winter

Start by assessing your available space. If you have a garage or shed that stays dry, indoor storage is the simplest route. Measure the length and width of your trailer to make sure it fits comfortably with room to walk around.

If indoor space isn’t an option, look at the climate in your area. Regions with heavy snowfall need a cover that can shed water and resist tearing. Look for covers with reinforced grommets and a UV‑stable coating.

Consider your budget. A basic tarp and a set of jack stands can be bought for under $50, while a premium canvas cover or a metal shed may run several hundred dollars. Choose the option that gives the best protection for what you can spend.

Finally, think about ease of use. You’ll want to be able to put the cover on and take it off without a struggle. Features like zippered panels, quick‑release buckles, and lightweight materials make the process faster.

Installation and Setup of how to store a jon boat trailer over winter

First, clean the trailer thoroughly. Wash off mud, salt, and debris with a hose and let it dry completely. A dry surface helps prevent mold under the cover.

Next, lift the trailer off the ground. Place jack stands under the frame near the axle and under the tongue if possible. This takes weight off the tires and helps avoid flat spots.

Now lay down a ground barrier if you’re storing outdoors. A sheet of heavy‑duty plastic or a pallet keeps moisture from wicking up into the frame.

Drape your chosen cover over the trailer. Make sure it extends a few inches past the front and rear so water runs off rather than pooling. Secure the cover with bungee cords, ratchet straps, or the built‑in tie‑downs that come with many covers.

Finally, add a couple of moisture‑absorbing packets or a small dehumidifier bag inside the cover if you notice dampness. Check the trailer once a month during winter to look for signs of water intrusion, pests, or loosened straps.

Tips for Using “how to store a jon boat trailer over winter” Effectively

Check the tire pressure before you store the trailer. Slightly over‑inflating by a few psi can help compensate for any slow leaks that develop over the cold months.

Lubricate the wheel bearings and hubs with a marine‑grade grease. This creates a barrier against water and keeps the bearings turning smoothly when you reinstall the wheels.

Inspect the lights and wiring. Spray a little dielectric grease on the connectors to prevent corrosion. Replace any bulbs that are dim or flickering.

If you store outdoors, angle the cover so that rain and snow slide off the sides. A slight tilt prevents water from pooling on top, which could lead to leaks or sagging.

Keep a simple checklist on your phone or a notepad: cover tight, stands secure, no water inside, tires off ground. A quick glance each month makes the whole process painless.

How It Works for Me

Last winter I set up my jon boat trailer in the corner of my garage. I placed two adjustable jack stands under the frame and a third under the tongue. I covered the trailer with a 12‑mil polyethylene tarp that I bought at the local hardware store. I fastened the tarp with ratchet straps attached to the trailer’s frame.

Every four weeks I rolled the tarp back, inspected the tires for any flat spots, and gave the bearings a quick wipe with a clean rag. I also checked the lights by plugging the trailer into my truck and verifying that all signals worked.

When spring arrived, I removed the tarp, lowered the jack stands, and gave the trailer a quick wash. The tires were still round, the bearings felt smooth, and there was no sign of rust on the frame. I launched my jon boat without any delays.

What I Like

I like how simple the process is. You don’t need special tools or a lot of time to get the trailer ready for winter. A tarp, a couple of jack stands, and a few minutes of inspection are all it takes.

I also appreciate the cost savings. Spending under $50 on a tarp and jack stands has saved me hundreds in potential repair bills.

The peace of mind is another big plus. Knowing that my trailer is safe and dry lets me focus on planning my next fishing trip instead of worrying about hidden damage.

What Could Be Better

One drawback of using a tarp is that it can flap in strong winds if not secured tightly. I’ve had to readjust the straps a few times after a gusty night.

Another limitation is that a tarp doesn’t offer the same level of UV protection as a dedicated canvas cover. Over several years the tarp may become brittle.

Finally, storing indoors isn’t always possible for everyone. If you live in an apartment or a home without a garage, you’ll need to rely on an outdoor solution, which requires more frequent checks.

My Personal Experience

I’ve been using the tarp‑and‑jack‑stand method for three winters now. Each year I’ve noticed less corrosion on the frame and no tire flat spots. The biggest surprise was how easy it was to spot a small leak in the brake line during a mid‑winter check; fixing it early saved me from a potential brake failure on the road.

I’ve also tried a canvas cover for one season. It stayed put better in the wind, but it was more expensive and took longer to put on and take off. For my budget and storage space, the tarp method remains my go‑to.

Overall, the routine has become a quick monthly habit that takes less than ten minutes. The result is a trailer that feels as good as new each spring.

Recommendation

If you’re looking for a reliable, low‑cost way to store your jon boat trailer over winter, start with a heavy‑duty tarp and a set of adjustable jack stands. This combo protects the frame, keeps the tires off the ground, and is easy to set up and remove.

Make sure to clean the trailer first, lift it with the stands, and secure the tarp so wind can’t get underneath. Check the cover and the trailer once a month throughout the winter.

For extra protection, consider adding a moisture‑absorbing bag inside the cover and a light coating of dielectric grease on the electrical connectors.

How to Use how to store a jon boat trailer over winter Effectively

Begin by washing the trailer and letting it dry completely. This removes salt and dirt that could trap moisture under the cover.

Position the jack stands so they support the frame near the axle and under the tongue. Lift the trailer just enough to take the weight off the tires.

Lay a ground barrier such as a pallet or plastic sheet if you’re storing outside. This stops groundwater from seeping into the frame.

Drape the cover over the trailer, making sure it overhangs the front and rear by at least six inches. Secure it with bungee cords or ratchet straps, checking that the cover is tight but not tearing.

Insert a couple of silica gel packets or a small dehumidifier bag under the cover to fight dampness. Set a calendar reminder to inspect the trailer every four weeks.

When you’re ready to launch again, remove the cover, lower the jack stands, give the tires a quick pressure check, and test the lights before hitting the road.

how to store a jon boat trailer over winter Alternatives

If a tarp and jack stands don’t suit your situation, consider these alternatives:

  • Custom‑fit canvas trailer cover – offers better UV resistance and built‑in vents.
  • Metal or plastic storage shed – provides full enclosure and lockable security.
  • Wooden pallet platform with a sloped roof – a DIY option that lifts the trailer and sheds water.
  • Indoor garage storage with a floor mat – ideal if you have space; the mat catches drips and keeps the tires clean.

Each alternative has trade‑offs in cost, setup time, and level of protection. Choose the one that matches your climate, budget, and available space.

My Personal Recommendation for how to store a jon boat trailer over winter: Feature the top choice with a compelling CTA

After trying several methods, I recommend the heavy‑duty tarp paired with adjustable jack stands as the best overall solution for most jon boat owners. It’s affordable, easy to install, and provides solid protection against rust, tire flat spots, and moisture.

To get started, visit Amazon and search for “boat trailer cover” to find a tarp that fits your trailer’s dimensions. Pair it with a set of jack stands rated for at least 2,000 pounds.

Click the link above, choose a cover with reinforced grommets, and order your jack stands today. Your trailer will thank you when spring arrives.

Quick Comparison Table for how to store a jon boat trailer over winter

Solution Type Key Benefit Price Range Best For
Heavy‑duty tarp + jack stands Low cost, easy setup, protects frame and tires $30‑$70 Budget‑conscious boaters with garage or shed space
UV‑protected canvas trailer cover Better UV resistance, built‑in vents, snug fit $80‑$150 Boaters who want a tighter, longer‑lasting cover
Metal or plastic storage shed Full enclosure, lockable, protects from all weather $200‑$500 Those with outdoor space who desire maximum security
DIY pallet platform + sloped roof Customizable, uses reclaimed materials, good drainage $20‑$60 (materials) Handy DIYers with basic tools and spare lumber

Conclusion about how to store a jon boat trailer over winter

Storing a jon boat trailer over winter doesn’t have to be complicated or expensive. A simple tarp, a set of jack stands, and a monthly check can keep your trailer rust‑free, tire‑ready, and road‑worthy for many seasons. If you have the space, indoor storage adds extra peace of mind, but a well‑secured outdoor cover works just as well.

Take the time now to clean, lift, and cover your trailer. You’ll save money on repairs, avoid frustrating spring‑time surprises, and get more time on the water doing what you love.

FAQs about how to store a jon boat trailer over winter

What is the best how to store a jon boat trailer over winter?

The best method is a heavy‑duty tarp combined with adjustable jack stands. It protects the frame, keeps tires off the ground, and is inexpensive and easy to set up.

How much does how to store a jon boat trailer over winter cost?

A basic tarp and jack stands can be bought for under $50. Premium canvas covers or storage sheds range from $80 to $500 depending on size and features.

What should I look for when buying how to store a jon boat trailer over winter?

Look for a cover with reinforced grommets, UV‑stable material, and proper size for your trailer. Pair it with jack stands rated for at least 2,000 pounds and a ground barrier if storing outdoors.

Leave a Comment