telescoping jon boat outriggers: 5 Tips

telescoping jon boat outriggers

I was struggling with keeping my jon boat steady while fishing in choppy water, then I discovered telescoping jon boat outriggers. They gave me the stability I needed without taking up too much space on the trailer.

  • telescoping jon boat outriggers add stability without permanent installation.
  • They are easy to store and deploy on most jon boats.
  • Choosing the right material and length matches your boat and fishing style.
  • Proper installation improves safety and comfort on the water.
  • Regular maintenance keeps them working smoothly for years.

Introduction

Introduction

I was struggling with keeping my jon boat steady while fishing in choppy water, then I discovered telescoping jon boat outriggers. The first time I set them up, the boat felt noticeably steadier, and I could focus on casting instead of bracing. This simple change turned a frustrating day into a productive one.

Why Use telescoping jon boat outriggers?

Why Use telescoping jon boat outriggers?

Many anglers face wobble when they stand or move in a small jon boat. telescoping jon boat outriggers solve this by widening the boat’s footprint on the water. They act like training wheels that you can pull out when needed and tuck away when you’re done. This flexibility is perfect for boats with limited deck space.

Using outriggers also reduces fatigue because you don’t have to constantly shift your weight to stay balanced. You can stay in one spot longer, which improves your chances of a bite. For those who enjoy standing to cast or sight‑fish, the added stability feels like a game changer.

Finally, they are lightweight enough to carry and install without special tools. Most models slide into existing mounts or clamp onto the gunwale. This means you can add stability without drilling permanent holes or altering the boat’s structure.

Benefits of Using telescoping jon boat outriggers

Benefits of Using telescoping jon boat outriggers

The primary benefit is increased lateral stability. When the outriggers are extended, they create a wider base that resists rolling from waves or wake. This makes standing, casting, and reeling in big fish feel safer.

Another benefit is ease of storage. Because they telescope, they collapse to a short length that fits in a boat locker or under a seat. You do not need a large storage area on the trailer or in the garage.

Cost effectiveness is also a plus. Compared to purchasing a wider hull or a stabilizer system, outriggers are usually far less expensive. They give you most of the stability benefit for a fraction of the price.

Finally, they improve confidence on the water. Knowing your boat will not tip unexpectedly lets you relax and enjoy the day. This mental comfort can be just as valuable as the physical stability they provide.

Types of telescoping jon boat outriggers

There are three main types based on the material used for the tubes: aluminum, steel, and composite. Each material offers a different balance of weight, strength, and price.

Aluminum outriggers are the lightest option. They resist corrosion well and are easy to handle. They work best for smaller boats where weight is a concern.

Steel outriggers provide the greatest strength and durability. They can handle heavier loads and rougher conditions. The trade‑off is extra weight and the need to protect against rust.

Composite outriggers blend fibers such as fiberglass or carbon with resin. They offer a middle ground: lighter than steel, stronger than plain aluminum, and resistant to corrosion. They often have a sleek appearance.

Some models also differ in how they attach. Clamp‑on versions use padded jaws that grip the gunwale. Slide‑on versions fit into pre‑drilled sleeves or brackets. Choose the attachment style that matches your boat’s existing hardware.

Among anglers, the most popular choice is the lightweight aluminum slide‑on model. It is easy to install, stores compactly, and costs less than $100 for a pair. Many users report that it adds enough stability for casual fishing and light‑tackle work.

Heavy‑duty steel clamp‑on outriggers are favored by those who fish in larger bodies of water with frequent wakes. They are often priced between $150 and $250 and can support extra weight from gear or a trolling motor.

Composite telescoping outriggers have gained traction among anglers who want a low‑maintenance, corrosion‑free option. They usually sit in the $120‑$180 range and are praised for their smooth telescoping action.

Some manufacturers offer kits that include mounting hardware, pins, and a storage bag. These all‑in‑one packages simplify the buying process and ensure you have everything needed for a secure fit.

How to Choose telescoping jon boat outriggers

Start by measuring the width of your boat’s gunwale where the outriggers will sit. You need enough clearance for the tubes to extend fully without hitting the hull. Write down this measurement before you shop.

Next, consider the typical water conditions you face. If you mostly fish calm lakes, a lighter aluminum pair may be sufficient. For choppy rivers or coastal bays, lean toward steel or composite for added strength.

Weight matters for both portability and boat performance. Lighter outriggers are easier to lift and store, but they may flex more under load. Heavier models resist flex but add weight to the boat’s sides.

Check the locking mechanism. A reliable pin or lever lock keeps the tubes from collapsing unexpectedly. Test the action in the store if possible; it should slide smoothly and lock firmly.

Finally, look at the warranty and return policy. A good warranty indicates the maker stands behind the product. This is especially important for steel models where rust could be a concern.

For authoritative guidance on boat stability and safety equipment, you can review the BoatUS safety guidelines here. They offer tips on selecting accessories that match your vessel’s size and use case.

Installation and Setup of telescoping jon boat outriggers

Begin by cleaning the mounting area on the gunwale. Remove any dirt, old sealant, or debris that could prevent a tight fit. A clean surface helps clamps or sleeves grip securely.

If you have a slide‑on model, insert the outrigger tube into the pre‑installed sleeve or bracket. Make sure it slides in smoothly without binding. If you feel resistance, check for obstructions or misalignment.

For clamp‑on versions, open the clamp jaws and place them over the gunwale. Tighten the adjustment knob or bolt until the clamp holds firmly but does not deform the aluminum or vinyl gunwale. You should feel solid resistance when you try to move the outrigger side‑to‑side.

Once the outriggers are seated, extend each tube to the desired length. Most models have marked increments; extend them equally on both sides to keep the boat balanced. Insert the locking pin or engage the lever lock to secure the length.

Give the boat a gentle rock to test stability. The outriggers should resist wobble without shifting. If you notice any movement, re‑check the clamps or sleeve fit and tighten as needed.

After you finish fishing, collapse the tubes, release the locks, and store the outriggers in a dry place. Rinse them with fresh water if you used them in saltwater to prevent corrosion.

For additional information on waterway conditions that affect boat stability, consult the USGS waterway maps here. Knowing the typical wave height and current can help you decide how far to extend the outriggers.

Tips for Using “telescoping jon boat outriggers” Effectively

Always extend the outriggers symmetrically. Unequal lengths can cause the boat to list to one side, which defeats the purpose of added stability.

When you are in very shallow water, retract the outriggers partially to avoid hitting the bottom. This also reduces drag when you are paddling or using a small motor.

If you plan to stand for long periods, consider adding a non‑slip mat to the deck where your feet will be. The outriggers keep the boat steady, and the mat gives you secure footing.

Check the locking pins before each trip. A pin that is not fully seated can slip under load, causing the tube to collapse unexpectedly.

Store the outriggers with a light coating of silicone spray on the sliding surfaces. This keeps the telescoping action smooth and prevents dirt from grinding inside the tubes.

When you are traveling on the trailer, secure the outriggers with a bungee cord or strap. This prevents them from sliding out and getting damaged during transport.

Finally, practice deploying and collapsing the outriggers at home a few times. Muscle memory makes the process quick and hassle‑free when you are on the water.

How It Works for Me

On a typical morning, I arrive at the launch ramp with my jon boat and a pair of aluminum telescoping outriggers already mounted on the gunwale. I loosen the knobs, slide the tubes out to about three feet, and lock them in place. The boat instantly feels wider and more planted.

As I paddle out to my favorite spot, I notice that the boat does not rock as much when a small wake passes. I can stand up to cast without feeling like I need to grab the gunwale for balance. This lets me focus on my technique rather than staying upright.

When I hook a larger fish, the outriggers help absorb the lateral force of the fish’s run. The boat stays level, and I can keep steady pressure on the line without the boat tipping.

At the end of the day, I release the locks, slide the tubes back in, and tighten the knobs for transport. The whole process takes less than two minutes, and the outriggers store neatly under the seat.

Overall, the system feels like a natural extension of the boat. It adds stability when I need it and disappears when I do not.

What I Like

I appreciate how lightweight the aluminum outriggers are. I can lift them with one hand and slide them into the storage bag without strain. This makes them ideal for solo trips where I handle all the gear myself.

The locking mechanism is simple and reliable. A sturdy pin drops into a hole, and I can feel it click securely. I have never experienced an accidental collapse while on the water.

Cost is another plus. I purchased my set for under $80, which is far less than buying a wider hull or a permanent stabilizer system. The performance gain feels well worth the price.

Finally, the low maintenance requirement suits my busy schedule. A quick rinse after saltwater use and occasional lubrication keep them working smoothly for months.

What Could Be Better

One limitation I have noticed is the flex in the aluminum tubes when they are fully extended under heavy load. If I stand near the edge with a heavy cooler, I can see a slight bend. This does not affect safety, but it is perceptible.

The clamps on my model sometimes leave faint marks on the gunwale after long periods of use. I mitigate this by placing a thin rubber pad between the clamp and the boat, but it adds an extra step.

I wish the tubes had a visual indicator that shows the exact extension length on both sides. Currently I rely on the marked increments, but a small laser‑etched line would make alignment faster.

Finally, the storage bag that came with the set is basic nylon. A more rugged, water‑resistant bag would protect the tubes better during long‑term storage.

My Personal Experience

My first season using telescoping jon boat outriggers was a learning curve. I initially extended them too far, which made the boat feel awkward when turning. After a few trips, I found the sweet spot—about two‑thirds of the maximum length gave me stability without hindering maneuverability.

I have used them in various conditions: calm morning lakes, windy afternoons on a reservoir, and light chop in a coastal bay. In each case, the outriggers reduced roll enough that I could stand comfortably to tie knots or adjust gear.

One memorable trip involved a sudden gust that pushed a wake across the water. My boat stayed level while nearby boats without outriggers rolled noticeably. This moment convinced me that the modest investment was worthwhile.

Over the past year, I have logged roughly fifty hours on the water with the outriggers deployed. They have shown no signs of corrosion, and the locking pins still engage smoothly. The only wear I see is minor scuffing on the tube ends from repeated sliding.

Overall, the outriggers have become a standard part of my jon boat setup. I rarely launch without them, and I feel more confident tackling a wider range of fishing scenarios.

Recommendation

If you fish from a jon boat and often feel uneasy when standing or moving, I recommend trying a pair of telescoping jon boat outriggers. They provide a noticeable increase in stability without permanent modifications to your boat.

Start with a lightweight aluminum model if you prioritize ease of handling and storage. If you regularly face rougher water, consider a steel or composite version for added strength.

Take the time to measure your gunwale, test the locking action, and practice the deploy‑collapse cycle at home. This preparation will make your first on‑water experience smooth and confidence‑building.

For a convenient place to browse options and read user feedback, you can check the Amazon search for telescoping jon boat outriggers here. This link shows a variety of models and lets you compare features side by side.

How to Use telescoping jon boat outriggers Effectively

Begin each outing by verifying that the mounting hardware is tight and free of corrosion. A quick visual check takes only a few seconds and prevents surprises on the water.

Deploy the outriggers before you leave the dock or launch ramp. Extend them to the length you determined during your home practice. This ensures you are stable as soon as you start moving.

While underway, keep an eye on the water conditions. If you encounter a larger wake than expected, you can extend the tubes a bit more for extra resistance. Conversely, in very shallow areas, retract them to avoid bottom contact.

When you are ready to reel in a big fish, plant your feet firmly on the deck and let the outriggers do the work of keeping the boat level. This lets you focus on the fight rather than balancing.

After you finish fishing, collapse the tubes, release the locks, and rinse them with fresh water if you were in saltwater. Dry them with a towel before storing to prevent water spots.

Store the outriggers in a shaded, dry location. Prolonged UV exposure can degrade some composite materials over time, so a boat locker or garage shelf works well.

Finally, inspect the locking pins and any moving parts before each trip. Replace any worn or damaged components promptly to maintain safety and performance.

telescoping jon boat outriggers Alternatives

If telescoping outriggers do not fit your boat or preferences, several alternatives can improve stability.

One option is fixed‑width outriggers that bolt permanently to the gunwale. They offer the same lateral resistance but cannot be retracted for storage. Installation requires drilling and may affect the boat’s resale value.

Another alternative is a stabilizer pod that hangs beneath the hull. These pods add buoyancy and dampen roll, but they can increase draft and may interfere with shallow‑water operation.

Inflatable outriggers are also available. They consist of air‑filled tubes that you attach to the sides and inflate when needed. They are very lightweight when deflated, but you need a pump and must monitor pressure.

Lastly, some anglers use adjustable beam extenders that slide out from the transom. These increase width at the rear of the boat and can help with steering stability, though they do not provide as much lateral resistance as side‑mounted outriggers.

Each alternative has trade‑offs in cost, installation complexity, and impact on boat handling. Consider your typical use case, budget, and willingness to modify the boat before choosing a solution.

My Personal Recommendation

After testing several styles, I find the lightweight aluminum slide‑on telescoping jon boat outriggers to be the best overall choice for most jon boat owners. They combine easy installation, compact storage, and sufficient stability for typical fishing conditions.

The specific model I use features a corrosion‑resistant aluminum tube, a sturdy pin lock, and a padded mounting sleeve that protects the gunwale. It costs under $80 and has lasted over a year of regular use with no issues.

If you want to give them a try, you can follow the Amazon search link I shared earlier to see current offers and read recent reviews. Look for a pair that includes the mounting hardware and a storage bag for added convenience.

Take the time to install them correctly, practice the deploy‑collapse routine, and enjoy the added confidence on the water. You may find, as I did, that a simple pair of outriggers transforms your jon boat experience.

Quick Comparison Table

Product Type Key Benefit Price Range Best For
Lightweight Aluminum Outrigger Easy to handle, resists corrosion $60‑$90 Calm lakes, lightweight boats, frequent storage
Heavy‑Duty Steel Outrigger Maximum strength, handles heavy loads $150‑$250 Rough water, larger gear, frequent wake
Composite Telescoping Outrigger Balanced weight, low maintenance $120‑$180 Mixed conditions, desire for corrosion‑free option

Conclusion

telescoping jon boat outriggers offer a practical way to increase stability on a small boat without permanent changes. They are lightweight, easy to store, and deploy in seconds. By choosing the right material and length, you can match the outriggers to your typical fishing conditions and boat size.

My own experience has shown that they reduce roll, let me stand comfortably to cast, and give me confidence when fighting bigger fish. The modest cost and simple maintenance make them a worthwhile addition for many anglers.

If you have been struggling with a tippy jon boat, consider giving telescoping outriggers a try. They may be the small upgrade that makes your time on the water safer, more enjoyable, and more productive.

FAQs

What is the best telescoping jon boat outriggers? The best choice depends on your boat and water conditions. Lightweight aluminum models are popular for calm lakes and easy storage, while steel or composite versions suit rougher water.

How much does telescoping jon boat outriggers cost? Prices vary by material and brand. You can expect to pay roughly $60‑$90 for aluminum pairs, $120‑$180 for composite, and $150‑$250 for heavy‑duty steel sets.

What should I look for when buying telescoping jon boat outriggers? Check the mounting style (slide‑on or clamp‑on), material weight, locking mechanism, and included hardware. Ensure the length range matches your gunwale width and intended use.

Leave a Comment