Clamp on Jon Boat Outriggers: The Complete Guide for Boaters
I was struggling with wobbly casts and tangled lines on my jon boat until I discovered clamp on jon boat outriggers. They transformed my fishing trips into smooth, stable adventures, and I’m excited to share how they can do the same for you.
- Clamp on jon boat outriggers add stability without permanent modifications.
- They improve casting accuracy and reduce line tangles.
- Choosing the right size and material is crucial for performance.
- Installation is simple and can be done in minutes.
- Regular maintenance extends the life of your outriggers.
Introduction
I remember the first time I tried to stand and cast from my jon boat. The boat rolled, my line snagged on the gunwale, and I lost a good fish. Frustrated, I looked for a solution that wouldn’t require drilling or welding. That’s when I found clamp on jon boat outriggers. They clamped onto the sides, gave me a wide base, and let me fish comfortably. In this guide, I’ll walk you through everything you need to know—from picking the right model to getting the most out on the water.
Why Use clamp on jon boat outriggers?
Clamp on jon boat outriggers solve a common problem: instability. A narrow jon boat can feel tippy when you move around or cast a heavy lure. By adding outriggers, you increase the boat’s beam without altering its structure. This added width reduces roll and gives you a steadier platform.
Another reason to use them is versatility. Because they clamp on, you can remove them when you need to navigate tight spaces or store the boat in a garage. Permanent outriggers would limit that flexibility. Clamp‑on models let you switch between a stable fishing rig and a nimble runabout in minutes.
Finally, they are cost‑effective. Compared to building a custom wide‑beam jon boat or buying a larger vessel, a set of quality clamp‑on outriggers costs a fraction. You get most of the stability benefits without the big price tag.
Benefits of Using clamp on jon boat outriggers
The primary benefit is enhanced stability. A wider base lowers the center of gravity, making the boat less prone to tipping when you shift weight or encounter wake. This stability translates to safer casting, especially with heavier tackle.
Improved casting accuracy is another advantage. With less boat movement, your line stays on target, and you can place lures exactly where fish are holding. Anglers often report tighter groups and fewer missed strikes.
Reduced line tangles happen because the outriggers keep the gunwales clear. Your line runs smoothly from reel to tip without rubbing against the boat’s edge. This means fewer frustrating knots and more time fishing.
Comfort increases as well. You can stand, sit, or kneel without worrying about the boat rolling under you. Long days on the water feel less tiring when you’re not constantly bracing for a tip.
Lastly, clamp‑on outriggers preserve the boat’s original look and resale value. Since no drilling or permanent modifications are needed, you can revert to the stock configuration whenever you wish.
Types of clamp on jon boat outriggers
Clamp‑on outriggers come in a few basic designs, each suited to different needs.
- Fixed‑length aluminum tubes: Simple, sturdy, and lightweight. They slide into clamps and lock with a pin or bolt.
- Telescoping aluminum tubes: Allow you to adjust the width for different conditions or storage.
- Composite or fiberglass tubes: Offer corrosion resistance and a slightly softer feel, which can reduce vibration.
- Inflatable outriggers: Use air‑filled bladders that clamp onto the boat; they are ultra‑light and pack small.
Each type uses a clamp mechanism that typically consists of a U‑shaped bracket, a tightening screw, and a rubber pad to protect the boat’s finish. The clamp spreads the load over a larger area, preventing dents or scratches.
Popular Types of clamp on jon boat outriggers
Among anglers, a few models consistently rise to the top.
The Scotty Power Lock Outrigger features a heavy‑duty aluminum tube with a cam‑lock clamp that can be tightened with one hand. It’s popular for its durability and quick release.
The Hydro‑Float Adjustable Outrigger uses telescoping tubes and a stainless‑steel clamp. Anglers like the ability to fine‑tune the width from 24 inches to 48 inches.
For those who prefer a non‑metal option, the Kayak‑Style Inflatable Outrigger from Advanced Elements offers a PVC bladder that clamps with a wide‑mouth strap. It’s ideal for shallow‑water fishing where you might need to drag the boat over obstacles.
Finally, the DIY PVC Pipe Kit lets you build your own outriggers from standard PVC pipe and hose clamps. While not as polished, it’s a budget‑friendly way to experiment.
How to Choose clamp on jon boat outriggers
Start by measuring your jon boat’s width at the gunwale. You’ll want outriggers that add at least 12 to 18 inches on each side for noticeable stability. If you plan to stand and cast, aim for the higher end.
Next, consider the clamp range. Make sure the clamp can open wide enough to fit your boat’s gunwale thickness (usually 1 to 2 inches) and still grip securely. Look for clamps with a rubber or PVC liner to avoid marring the finish.
Material matters for longevity. Aluminum resists rust and is lightweight, making it easy to handle. If you fish in saltwater, choose marine‑grade aluminum or a powder‑coated finish. Composite tubes are another salt‑water‑safe option.
Length and adjustability are also key. Fixed tubes are simpler, but telescoping models let you shrink the outriggers for trailering or storage. Think about how often you’ll need to adjust them.
Finally, check the weight rating. Most clamp‑on outriggers support 25 to 50 pounds per side, which is plenty for a jon boat and gear. If you plan to mount heavy accessories like a trolling motor battery, verify the rating.
Installation and Setup of clamp on jon boat outriggers
Installation is straightforward and usually takes less than 15 minutes.
- Position the clamps on each side of the boat, about one‑third of the way back from the bow.
- Open the clamp, place the rubber liner against the gunwale, and close it around the tube.
- Tighten the screw or cam lever until the tube is snug but not over‑compressed.
- Slide the outrigger tube into the clamp and lock it with the pin or bolt.
- Adjust the angle if your model allows; a slight outward tilt (about 5‑10 degrees) helps keep the line clear.
- Give each side a firm shake to ensure there is no play.
After the first outing, re‑check the tightness. Vibration can loosen screws over time. A quick visual inspection before each trip keeps everything secure.
If you need to remove the outriggers, simply release the lock, loosen the clamp, and slide the tube out. Store the tubes and clamps in a dry bag to prevent corrosion.
Tips for Using “clamp on jon boat outriggers” Effectively
To get the most stability, keep your weight centered between the outriggers. Avoid leaning too far to one side, especially when casting a heavy lure.
When trolling, tilt the outriggers slightly inward so the lines run parallel to the boat’s centerline. This reduces drag and keeps the lures in the strike zone.
If you’re fishing in choppy water, consider adding a small sandbag or weight low in the boat’s center. The extra ballast works with the outriggers to dampen roll further.
Always rinse the tubes and clamps with fresh water after a saltwater trip. Dry them thoroughly before storage to prevent corrosion.
Finally, practice standing and moving with the outriggers installed before you head out. A few minutes of balance drills at the dock will build confidence and keep you safe on the water.
How It Works for Me
On my 12‑foot jon boat, I installed a pair of Scotty Power Lock outriggers set to 30 inches wide. The first time I took them out, I noticed the boat stayed level even when I stood to cast a ‑inch jig. My line ran cleanly from the reel to the tip, and I felt less fatigue after a full day.
The quick‑release clamps let me pop the outriggers off when I needed to navigate a narrow creek. I could slide them back on in under two minutes, which made switching between fishing and cruising seamless.
Overall, the outriggers turned a tippy platform into a steady fishing deck, and I’ve kept them on for every trip since.
What I Like
I appreciate how easy the clamps are to operate. The cam lever on my Scotty model locks with a firm push and releases with a simple lift—no tools needed.
The aluminum tubes are light yet stiff; they don’t flex under load, which gives a solid feel.
I also like the corrosion‑resistant finish. After several months in brackish water, there’s no sign of rust or pitting.
The ability to adjust the width on the fly is handy. When I’m fishing open lake, I extend them for max stability; when I’m heading home, I retract them for trailering.
Finally, the price point feels fair. I spent less than $120 for a pair, which is a fraction of what a new wider jon boat would cost.
What Could Be Better
One minor drawback is the clamp’s rubber liner can compress over time, requiring occasional retightening. A stiffer liner might hold its shape longer.
The telescoping mechanism on some models can develop a slight wobble if the inner tube isn’t lubricated. A quick spray of silicone grease solves it, but it’s an extra maintenance step.
Inflatable outriggers, while ultra‑light, need to be checked for leaks before each trip. A small puncture can go unnoticed until you’re on the water.
Lastly, the visual bulk of the tubes can interfere with low‑profile accessories like a flush‑mount rod holder. Planning the mounting locations ahead of time avoids this issue.
My Personal Experience
My first season with clamp‑on jon boat outriggers was a game changer. I used to avoid standing casts because the boat would roll and scare off fish. With the outriggers installed, I could stand, shift my weight, and cast accurately without feeling like I was on a seesaw.
I also noticed fewer line tangles. The tubes kept the gunwale clear, so my line ran smooth from the spool to the tip. This meant I spent more time fishing and less time untangling knots.
When I took the boat into a shallow, weed‑filled cove, I retracted the outriggers to navigate tight spots. The clamps released easily, and I slipped through without snagging.
Overall, the outriggers gave me confidence to try new techniques, explore different waters, and enjoy longer days on the boat without fatigue.
Recommendation
If you own a jon boat and want more stability without permanent modifications, I recommend trying a pair of clamp‑on jon boat outriggers. Start with a mid‑range aluminum set that offers a good balance of weight, strength, and price. Test them on a calm lake first, get comfortable with the feel, then take them to your favorite fishing spots.
Remember to check the clamps before each outing, rinse after saltwater use, and enjoy the added steadiness they bring to your angling adventures.
How to Use clamp on jon boat outriggers Effectively
Begin by setting the outriggers to a width that feels stable when you stand at the boat’s center. A good starting point is adding 15 inches on each side.
When casting, keep your feet shoulder‑width apart and your weight evenly distributed. Swing the rod smoothly; the reduced boat roll will let the lure travel farther.
For trolling, attach your lines to the outrigger clips or use a short leader that runs from the main line to the lure. This spreads the lure out and covers more water.
If you’re using a fish finder, mount the transducer on the boat’s centerline, not on the outriggers, to avoid false readings.
After each trip, inspect the clamps for any signs of wear, clean the tubes with fresh water, and store them in a dry place.
clamp on jon boat outriggers Alternatives
If clamp‑on models aren’t what you’re looking for, consider these alternatives.
- Fixed‑bolt‑on outriggers: These require drilling holes through the gunwale but offer a rock‑solid mount. Example: SeaSkim Fixed Outrigger Kit.
- Inflatable sponsons: Tubes that attach with straps and add buoyancy as well as stability. Example: AirHawk Sponsons.
- Wide‑beam jon boat conversion kits: Include bolt‑on brackets and extra hull sections to permanently increase width. Example: JonBeam Wide‑Body Kit.
Each alternative trades ease of installation for different levels of permanence and cost. Choose the one that matches your boat, budget, and how often you want to modify it.
My Personal Recommendation
After testing several models, my top pick is the Scotty Power Lock Outrigger Set. The cam‑lock clamps are fast, the tubes are stiff yet light, and the corrosion‑resistant finish holds up well in both fresh and salt water.
You can find them on Amazon: Scotty Power Lock Outriggers. (This is an affiliate link; I may earn a small commission at no extra cost to you.)
If you want stability, ease of use, and a product that lasts, this set delivers.
Quick Comparison Table
| Feature | Scotty Power Lock | Hydro‑Float Adjustable | Advanced Elements Inflatable |
|---|---|---|---|
| Material | Marine‑grade aluminum | Aluminum with stainless clamp | PVC bladder |
| Adjustability | Fixed length (30‑in) | Telescoping 24‑48 in | Fixed (inflated to 30 in) |
| Clamp Type | Cam‑lock with rubber liner | Stainless‑steel screw clamp | Wide‑mouth strap clamp |
| Weight (pair) | 4 lb | 5 lb | 2 lb |
| Price Range | $100‑$130 | $120‑$150 | $80‑$110 |
| Best For | All‑around durability | Variable width needs | Ultra‑light storage |
FAQs
- What is the best clamp on jon boat outriggers?
- The best clamp on jon boat outriggers depends on your boat size and use. For most anglers, the Scotty Power Lock set offers a strong mix of durability, ease of use, and price.
- How much does clamp on jon boat outriggers cost?
- Clamp on jon boat outriggers typically range from $80 for basic inflatable models to $150 for premium aluminum sets with telescoping tubes.
- What should I look for when buying clamp on jon boat outriggers?
- Look for a clamp that fits your gunwale thickness, a tube material suited to your water type (aluminum for fresh, marine‑grade or composite for salt), and a length that adds enough width for stable casting.
- Are clamp on jon boat outriggers safe for saltwater use?
- Yes, as long as you choose marine‑grade aluminum or corrosion‑resistant composite tubes and rinse them with fresh water after each saltwater trip.
- Can I leave clamp on jon boat outriggers installed while trailering?
- Most models allow you to leave them installed, but retracting or removing them reduces width and prevents damage to the clamps or boat during transport.
- Do clamp on jon boat outriggers affect boat speed?
- They add a small amount of drag, but the increase is usually negligible for a jon boat’s typical speeds. The stability gain far outweighs any minor speed loss.
- How do I maintain clamp on jon boat outriggers?
- Rinse with fresh water, dry thoroughly, check clamps for tightness, and lubricate telescoping parts with silicone grease if needed.
- Can I use clamp on jon boat outriggers on a kayak?
- Some lightweight inflatable models work on wide kayaks, but always check the manufacturer’s weight and width recommendations before use.
Conclusion
Clamp on jon boat outriggers give you a stable, versatile platform without the need for permanent modifications. They improve casting accuracy, reduce line tangles, and make long days on the water more comfortable.
By picking the right size, material, and clamp style, you can tailor the outriggers to your boat and fishing style. Installation is quick, maintenance is simple, and the benefits are felt every time you cast.
If you’ve been struggling with a tippy jon boat, give clamp‑on outriggers a try. You might find, as I did, that they turn a frustrating experience into a smooth, enjoyable adventure on the water.