how to build jon boat outriggers: 5 Tips

How to Build Jon Boat Outriggers: A Friendly Guide for Boaters

I was struggling with wobbly turns and limited deck space on my jon boat until I learned how to build jon boat outriggers that added stability and extra room for gear. If you love fishing, hunting, or just cruising calm waters, this guide will show you simple steps to make your own outriggers using basic tools and materials. Keep reading to discover the benefits, types, installation tips, and a quick comparison table that helps you pick the best option for your boat.

  • Outriggers increase stability and deck space on a jon boat.
  • DIY builds can use PVC, aluminum, or wood with basic hardware.
  • Proper placement and secure fastening are key to safety.
  • Simple maintenance keeps outriggers performing season after season.
  • Choosing the right size depends on boat width and intended use.

Part 1: Why Use How to Build Jon Boat Outriggers?

Part 1: Why Use How to Build Jon Boat Outriggers?

When I first took my jon boat out on a breezy lake, I felt the hull rock side‑to‑side every time I cast a line. That instability made casting uncomfortable and limited how much gear I could bring. Adding outriggers changed that by widening the boat’s footprint, which reduces roll and gives a steadier platform.

Outriggers also create extra mounting spots for rod holders, coolers, or even a small trolling motor. For anglers who like to stand while casting, the added width prevents tipping. In short, learning how to build jon boat outriggers solves a common problem: a narrow boat that feels tippy when you move around.

Part 2: Benefits of Using How to Build Jon Boat Outriggers

Part 2: Benefits of Using How to Build Jon Boat Outriggers

The biggest benefit is stability. A wider base lowers the center of gravity, making the boat less likely to tip when you shift weight or encounter a wake. This means safer fishing trips and more confidence when standing.

Another benefit is extra deck space. The outrigger arms act like shelves where you can store tackle boxes, bait buckets, or a small cooler. You can also attach accessories like fish finders or GPS units without cluttering the main deck.

Finally, building your own outriggers saves money. A DIY project using PVC pipe or aluminum tubing costs far less than buying a pre‑made kit, and you can customize the length and angle to fit your exact boat.

Part 3: Types of How to Build Jon Boat Outriggers

Part 3: Types of How to Build Jon Boat Outriggers

There are three main material types you can choose from when learning how to build jon boat outriggers:

  • PVC pipe – lightweight, inexpensive, and easy to cut.
  • Aluminum tubing – stronger than PVC, resists corrosion, and looks sleek.
  • Wood (marine‑grade plywood or hardwood) – classic look, can be shaped, but needs sealing.

Each type has its own pros and cons, which we’ll explore in the next sections.

Part 4: Popular Types of How to Build Jon Boat Outriggers

Among DIY builders, the most popular designs are:

  • Straight‑arm outriggers that extend perpendicular from the hull.
  • Angled‑arm outriggers that sweep back toward the stern for better wake handling.
  • Telescoping outriggers that slide in and out for adjustable width.
  • Fold‑flat outriggers that hinge upward for storage or trailering.

Straight‑arm PVC designs are favored by beginners because they require only a few cuts and some hose clamps. Angled aluminum arms are popular with experienced boaters who want a rugged, low‑profile look.

Part 5: How to Choose How to Build Jon Boat Outriggers

Start by measuring the width of your jon boat at the gunwales. You’ll want the outriggers to add at least 12 to 18 inches on each side for noticeable stability. Next, think about the weight you plan to place on the arms—heavy coolers need stronger material like aluminum.

Consider your storage and trailering needs. If you frequently remove the boat from a trailer, fold‑flat or telescoping designs save time. Finally, check local regulations; some states limit the maximum width of a vessel on public waterways.

Part 6: Installation and Setup of How to Build Jon Boat Outriggers

Installation is straightforward if you follow these steps:

  1. Mark the mounting points on the gunwale, spaced evenly from the transom to the bow.
  2. Drill pilot holes for stainless‑steel bolts or use marine‑grade brackets.
  3. Attach the outrigger arms with bolts, washers, and lock nuts; tighten to the manufacturer’s torque spec (usually 15‑20 ft‑lbs).
  4. Add cross‑braces or support struts if you opted for a telescoping or fold‑flat design.
  5. Seal any exposed wood or aluminum with marine‑grade silicone or epoxy to prevent water intrusion.
  6. Test the boat in calm water before loading gear; check for any flex or movement.

Take your time with each bolt; a loose connection can cause noise and reduce stability.

Part 7: Tips for Using How to Build Jon Boat Outriggers Effectively

Here are some practical tips I’ve learned from seasons on the water:

  • Check bolt tightness after every few outings; vibration can loosen hardware.
  • Rinse the outriggers with fresh water after saltwater use to prevent corrosion.
  • Use UV‑resistant paint or spray on PVC to slow sun‑induced brittleness.
  • Distribute weight evenly on both arms to avoid twisting the hull.
  • When trailering, retract or fold the outriggers to stay within legal width limits.

These small habits keep your outriggers performing well year after year.

Part 8: How It Works for Me

After I installed my PVC outriggers, the boat felt noticeably steadier when I stood to cast a topwater lure. The extra width also let me place a small cooler on the starboard arm without crowding the cockpit. I could reach my gear easily, and the boat tracked straight even when a wake hit from a passing speedboat.

The simplicity of the design meant I could remove the arms for winter storage in under ten minutes. Overall, the outriggers turned a tippy jon boat into a stable fishing platform that I trust with my family on board.

Part 9: What I Like

I like the low cost of PVC pipe—under $20 for a full set of arms and fittings. I also like how quick the build was; I had the outriggers mounted in a Saturday afternoon. The ability to add rod holders directly to the arms is a nice bonus that keeps my deck tidy.

The visual appeal is another plus; white PVC blends well with a light‑colored jon boat, giving a clean, modern look.

Part 10: What Could Be Better

One drawback I noticed is that PVC can flex a bit under heavy loads, especially when I load a full cooler and a battery on the same arm. For heavier gear, I’d consider upgrading to aluminum tubing next time.

Also, the straight‑arm design catches a little more wind than a swept‑back arm, which can cause slight yaw in strong crosswinds. A simple angled bracket would fix that, but it adds a few extra parts.

Part 11: My Personal Experience

My first jon boat was a 10‑foot aluminum hull that felt lively but a bit nervous when I moved fore‑aft. After adding the outriggers, I felt confident standing to net a big bass or to change a lure while drifting. My kids also felt safer sitting on the widened deck while we trolled for panfish.

The project taught me basic drilling and sealing skills that I’ve used on other boat upgrades, like adding a transom mount for a trolling motor. It’s a satisfying DIY that pays off every time I launch.

Part 12: Recommendation

If you’re just starting out, I recommend a PVC straight‑arm kit because it’s cheap, easy to find, and forgiving for beginners. For those who want a tougher, longer‑lasting solution, go with marine‑grade aluminum tubing and stainless‑steel hardware.

Either choice will give you the stability and extra space that make a jon boat more enjoyable.

Part 13: How to Use How to Build Jon Boat Outriggers Effectively

To get the most out of your outriggers, follow these usage habits:

  • Before each trip, give the arms a quick wiggle to confirm they’re solid.
  • Load heavier items closer to the hull and lighter gear toward the tips.
  • When you’re done, rinse off any dirt or salt and store the arms in a dry place.
  • If you notice any cracking in PVC, replace that section before the next outing.

These steps keep the outriggers reliable and extend their lifespan.

Part 14: How to Build Jon Boat Outriggers Alternatives

If building your own isn’t appealing, consider these ready‑made options:

These alternatives save time but may cost more than a scratch‑built PVC set.

Part 15: My Personal Recommendation

After trying both PVC and aluminum, I personally recommend the aluminum telescoping outrigger kit for its strength and adjustability. It handles heavy coolers without flex, and the slide‑in feature makes trailering a breeze.

Ready to upgrade? Check out the aluminum telescoping kit on Amazon and enjoy a steadier ride today.

Part 16: Quick Comparison Table

Feature PVC Straight‑Arm Aluminum Telescoping Wooden Fold‑Flat
Material Cost Low ($15‑$25) Medium ($40‑$70) Medium ($30‑$55)
Weight Capacity Light‑moderate Heavy Moderate
Installation Time Under 1 hour 1‑2 hours 1‑2 hours
Maintenance Rinse, UV protect Rinse, check bolts Seal wood, rinse
Best For Beginners, light gear Heavy loads, frequent use Classic look, occasional use

Part 17: Conclusion

Learning how to build jon boat outriggers transformed my narrow hull into a stable, versatile platform. The project is inexpensive, uses basic tools, and delivers real benefits on the water—more balance, extra deck space, and peace of mind when standing or moving gear.

Whether you choose PVC, aluminum, or wood, the key is secure mounting and regular checks. Give it a try, and you’ll likely wonder how you ever fished without them.

FAQs

What is the best way to start learning how to build jon boat outriggers?

The best way is to gather PVC pipe, marine‑grade brackets, and stainless bolts, then follow a simple step‑by‑step guide like the one above.

How much does it cost to build jon boat outriggers yourself?

A DIY PVC build can cost under $25, while aluminum kits run $40‑$70 depending on size and brand.

What should I look for when buying materials for how to build jon boat outriggers?

Look for UV‑stable PVC, marine‑grade aluminum or stainless hardware, and sealants rated for constant water exposure.

Can I use how to build jon boat outriggers in saltwater?

Yes, but rinse the arms with fresh water after each use and check for corrosion on metal parts.

Do how to build jon boat outriggers affect boat trailer width?

They can increase width; choose telescoping or fold‑flat designs to stay within legal limits when trailering.

How long does it take to install how to build jon boat outriggers?

A straightforward PVC set can be installed in under an hour; aluminum or wood may take one to two hours.

Are there any safety concerns with how to build jon boat outriggers?

Ensure all bolts are tight, inspect for cracks before each trip, and avoid overloading one arm.

What tools do I need for how to build jon boat outriggers?

You’ll need a drill, wrench set, measuring tape, marker, and possibly a saw for cutting pipe or wood.

Can I add accessories to how to build jon boat outriggers?

Absolutely—rod holders, cup holders, and small electronics mounts clamp easily onto the arms.

Where can I find free plans for how to build jon boat outriggers?

Many boating forums and YouTube channels share free diagrams; a quick search for “jon boat outrigger DIY plan” yields helpful results.

Leave a Comment