diy jon boat outrigger plans
I was struggling with keeping my jon boat steady while casting for bass, constantly battling the wobble that scared away fish. Then I discovered diy jon boat outrigger plans and realized a simple stabilizer could turn my shaky platform into a steady fishing deck. In this guide I’ll walk you through why outriggers matter, how to pick the right design, and how to build and use them safely—so you can spend more time reeling and less time fighting the boat.
- Outriggers increase lateral stability, reducing roll and improving safety.
- Simple PVC or wooden designs are affordable and beginner‑friendly.
- Proper attachment to the gunwales and balanced buoyancy are key.
- Testing in calm water before heading out prevents surprises.
- Regular inspection of connections extends the life of your outriggers.
Introduction
I remember the first time I took my jon boat out on a windy afternoon. The boat rolled side‑to‑side with each cast, and I felt uneasy every time a gust hit. A friend mentioned that a pair of outriggers could act like training wheels for a boat, giving it a wider footprint and much‑needed steadiness. Intrigued, I searched for diy jon boat outrigger plans and found a handful of straightforward designs that used PVC pipe, marine‑grade plywood, or even aluminum tubing. The idea of building my own stabilizers appealed to my love of hands‑on projects, and the promise of a smoother ride was exactly what I needed.
Why Use diy jon boat outrigger plans?
The primary reason to add outriggers to a jon boat is to increase its beam—the width measured at the widest point. A wider beam raises the boat’s resistance to rolling, which is especially helpful when you’re standing, casting, or moving gear around. For anglers who spend hours perched on the gunwale, that extra stability translates into less fatigue and better accuracy. Moreover, outriggers can provide a mounting platform for accessories like rod holders, lights, or even a small trolling motor, turning a basic jon boat into a more versatile fishing platform.
Benefits of Using diy jon boat outrigger plans
- Improved stability: The added buoyancy on each side counters lateral forces from wind, waves, or sudden movements.
- Increased load capacity: With more buoyancy, you can safely carry extra gear, a cooler, or a second passenger.
- Custom fit: Building your own lets you tailor the length, height, and attachment points to your specific boat.
- Cost savings: DIY solutions often cost a fraction of commercial outrigger kits.
- Learning experience: The build process teaches basic marine fabrication skills that are useful for future projects.
Types of diy jon boat outrigger plans
There are three broad families of homemade outriggers that appear repeatedly in forums and tutorial videos:
- PVC pipe outriggers: Lightweight, corrosion‑resistant, and easy to cut and glue.
- Wooden outriggers: Typically made from marine‑grade plywood or hardwood, offering a classic look and solid buoyancy.
- Metal outriggers: Aluminum or stainless‑steel tubes provide high strength‑to‑weight ratio and can be welded or bolted.
Popular Types of diy jon boat outrigger plans
Within each family, certain designs have gained traction because they balance simplicity, cost, and performance.
PVC‑Based Designs
The most common PVC design uses two 4‑inch diameter pipes, each cut to a length of 4–6 feet. The pipes are mounted on angled brackets that sit just above the gunwale, with the outer ends fitted with end caps and optionally filled with foam for extra buoyancy. This setup is popular because the materials are inexpensive, the build requires only a hacksaw and PVC cement, and the result is lightweight enough to remove for transport.
Wood‑Based Designs
A classic wooden outrigger consists of a 2‑by‑4 or 2‑by‑6 board, cut to length, sealed with marine epoxy, and attached via stainless‑steel U‑bolts that clamp to the gunwale. Some builders add a triangular gusset for extra rigidity. Wood offers a natural aesthetic and can be painted to match the boat.
Metal‑Based Designs
For those with access to a welder, aluminum tubing (1‑inch square or round) provides a strong, lightweight frame. The tubes are cut to length, fitted with end caps, and bolted to custom‑fabricated mounting plates. Metal outriggers are ideal if you plan to mount heavy accessories like a trolling motor or a live‑well.
How to Choose diy jon boat outrigger plans
Selecting the right plan starts with answering a few practical questions:
- What is your boat’s width and weight? Heavier, wider boats may need longer or more buoyant outriggers.
- How much DIY experience do you have? PVC projects need only basic cutting and gluing; wood requires sealing and fastening; metal demands welding or drilling.
- What accessories will you mount? If you plan to add a trolling motor, choose a design with a solid mounting platform.
- What is your budget? PVC is usually the cheapest; wood falls in the middle; metal can be pricier depending on material costs.
- Do you need removable outriggers? Some designs use quick‑release pins or clamps for easy removal.
Answering these points will steer you toward a plan that matches your skill level, boat, and fishing style.
Installation and Setup of diy jon boat outrigger plans
Once you have your materials cut and prepared, follow these general steps. Adjust them according to the specific plan you chose.
- Measure and mark: Determine the optimal mounting points on each gunwale—usually about one‑third of the boat’s length from the bow and stern.
- Prepare mounting hardware: For PVC, use PVC‑compatible brackets or stainless‑steel U‑bolts. For wood, drill pilot holes for marine‑grade screws or bolts. For metal, fabricate mounting plates with pre‑drilled holes.
- Attach the outriggers: Secure each outrigger to the gunwale, ensuring they sit at a slight outward angle (typically 15‑20°) to maximize buoyancy.
- Add buoyancy (if needed): Fill PVC ends with closed‑cell foam or attach foam blocks to wooden outriggers.
- Check alignment: The outriggers should be parallel to the boat’s centerline and sit at the same height on both sides.
- Seal and protect: Apply marine sealant to any exposed edges, especially on wood, to prevent water intrusion.
- Test in calm water: Before heading out, place the boat in a sheltered area and gently rock it side‑to‑side to verify stability.
Tips for Using “diy jon boat outrigger plans” Effectively
- Always double‑check that all bolts, screws, or cement joints are tight before each trip.
- Rinse the outriggers with fresh water after use in saltwater to prevent corrosion.
- Store the boat with the outriggers removed if you’ll be trailering it for long distances—this reduces wind drag and stress on the mounts.
- Consider adding reflective tape or small lights to the outer ends for increased visibility at dawn or dusk.
- If you notice any flex or creaking, inspect the mounting points immediately; a loose joint can compromise safety.
How It Works for Me
After installing my PVC outriggers, I took the boat out on a breezy Saturday. The difference was immediate: the boat felt planted, and I could stand on the gunwale to cast without feeling like I might tip. The outriggers also gave me a convenient place to clip a pair of rod holders, keeping my tackle organized and within reach. Even when a sudden gust pushed the boat sideways, the added buoyancy resisted the roll, letting me recover quickly.
What I Like
- The low cost—PVC pipe and fittings totaled under $25.
- The simplicity of the build; I finished it in an afternoon with basic tools.
- The lightweight nature makes it easy to remove for transport.
- The versatility—I’ve added a small solar panel to power my phone charger.
What Could Be Better
- PVC can become brittle in extreme cold; I plan to switch to a foam‑filled design for winter fishing.
- The outer ends occasionally catch on weeds; adding a rounded end cap helped.
- I wish I had added a slight upward angle to the outriggers to lift the bow slightly in choppy water.
My Personal Experience
My first jon boat was a modest 10‑foot aluminum hull that tended to roll when I moved gear from one side to the other. After building the outriggers, I noticed a marked improvement in comfort during long fishing trips. I could shift my weight without the boat reacting dramatically, which made casting and reeling far less tiring. The outriggers also gave me confidence to bring along a small cooler and a second passenger without worrying about stability.
Recommendation
If you own a jon boat and find yourself battling side‑to‑side motion, I recommend trying a set of DIY outriggers. Start with a simple PVC design if you’re new to boat modifications; it’s inexpensive, forgiving, and easy to adjust. Take the time to measure your boat, test the fit in calm water, and always double‑check your fasteners before heading out.
How to Use diy jon boat outrigger plans Effectively
Effective use goes beyond the initial installation. Here are a few habits that keep your outriggers performing well:
- Inspect the mounting hardware before each outing.
- Rinse with fresh water after saltwater exposure.
- Check buoyancy elements (foam, end caps) for water absorption or damage.
- Keep the outriggers clean; dirt and algae can add unnecessary weight.
- When trailering, remove the outriggers or secure them tightly to avoid wind‑induced stress.
diy jon boat outrigger plans Alternatives
If building your own outriggers isn’t appealing, consider these alternatives:
- Inflatable outrigger kits: These consist of PVC‑coated tubes that you inflate and attach with straps. They’re portable and require no permanent modifications.
- Commercial aluminum outriggers: Sold by marine‑hardware retailers, they come pre‑drilled and often include mounting brackets.
- Outrigger poles: Long, sturdy poles that slip into sleeves mounted on the gunwale; they can be removed when not needed.
My Personal Recommendation (Feature the top choice with a compelling CTA)
After testing several approaches, I’ve settled on a PVC‑based outrigger with foam‑filled ends as my go‑to solution. It offers the best mix of affordability, ease of build, and reliable stability for my 12‑foot jon boat. If you’re ready to give your boat a steadier platform, gather the materials, follow the simple steps outlined above, and enjoy a smoother ride on the water.
Quick Comparison Table
| Design Type | Key Benefit | Typical Materials | Skill Level |
|---|---|---|---|
| PVC Pipe | Lightweight, corrosion‑resistant, easy to modify | PVC pipe, fittings, marine foam, PVC cement | Beginner |
| Wooden | Classic look, solid buoyancy, can be painted | Marine‑grade plywood or hardwood, epoxy, stainless bolts | Intermediate |
| Metal (Aluminum) | High strength‑to‑weight, ideal for heavy accessories | Aluminum tubing, end caps, mounting plates, weld or bolts | Advanced |
FAQs
-
What is the best diy jon boat outrigger plans?
The “best” plan depends on your boat, budget, and skill level. For most beginners, a PVC pipe design with foam‑filled ends offers a good balance of cost, ease of build, and stability.
-
How much does diy jon boat outrigger plans cost?
A basic PVC outrigger set can be built for $20‑$35 if you already have basic tools. Wooden versions may run $40‑$70, while aluminum builds start around $80 and go up with hardware.
-
What should I look for when buying diy jon boat outrigger plans?
Look for clear measurements, a list of required materials, step‑by‑step photos or diagrams, and notes on mounting hardware compatibility with your boat’s gunwale.
-
Can I remove the outriggers when trailering?
Yes. Most DIY designs use bolts, U‑bolts, or quick‑release pins that let you take the outriggers off quickly to reduce wind drag and stress on the mounts.
-
Do outriggers affect the boat’s speed?
They add a small amount of drag, but the impact on speed is usually minimal for a jon boat, especially at the low speeds typical for fishing.
Conclusion
Building your own outriggers is a practical way to tame the wobble that can make a jon boat feel unstable. Whether you choose PVC, wood, or metal, the key is to match the design to your boat’s size, your comfort with tools, and the accessories you plan to mount. With a solid set of outriggers, you’ll enjoy a steadier platform, better casting accuracy, and the peace of mind that comes from knowing your boat won’t roll unexpectedly. Give it a try, and you may find that those simple side‑tubes become one of your favorite upgrades.