Jon Boat Outrigger Mounting Options: 5 Things to Know

jon boat outrigger mounting options: The Ultimate Guide for Boaters

If you’ve ever felt your jon boat wobble when you cast a line or chase a fish, you know how frustrating instability can be. I was struggling with constant tipping and limited deck space until I discovered the right jon boat outrigger mounting options. In this guide I’ll walk you through why they matter, how to pick the best system, and share my personal experience so you can enjoy a steadier, more enjoyable day on the water.

Table of Contents

Key Takeaways

Introduction
  • jon boat outrigger mounting options greatly improve stability and deck space.
  • Choose a system based on boat size, weight capacity, and mounting style.
  • Proper installation prevents leaks and ensures long‑term reliability.
  • Regular maintenance keeps the outriggers performing at their best.
  • Consider alternatives like inflatable stabilizers if permanent mounts aren’t ideal.

Introduction

Why Use jon boat outrigger mounting options?

I was struggling with a tippy jon boat every time I moved to the front to cast a lure. The boat would rock, my gear would slide, and I felt unsafe. Then I discovered jon boat outrigger mounting options. Adding a pair of sturdy outriggers transformed my boat into a stable platform, letting me stand, cast, and even bring a small cooler without fear.

Why Use jon boat outrigger mounting options?

Benefits of Using jon boat outrigger mounting options

The main reason boaters add outriggers to a jon boat is to increase lateral stability. A jon boat has a flat bottom and a narrow beam, which makes it prone to rolling when weight shifts. By extending the effective width with outriggers, you create a wider base that resists tipping. This is especially helpful when you stand to cast, when you have a dog on board, or when you carry extra gear like a trolling motor or a livewell.

Another reason is to gain extra deck space. Outriggers can serve as a platform for rod holders, bait trays, or even a small seat. Some anglers mount a small table on the outrigger to keep tackle organized. The added width also makes it easier to walk from one side of the boat to the other without stepping over the gunwale.

Finally, outriggers can improve safety. A more stable boat reduces the chance of capsizing, which is vital when you’re far from shore or in choppy water. Many boaters report feeling more confident and relaxed after installing outriggers, which leads to longer, more enjoyable trips.

Benefits of Using jon boat outrigger mounting options

Using jon boat outrigger mounting options brings several tangible benefits:

  • Increased stability: The boat rolls less, making casting and reeling smoother.
  • More usable deck area: You can add accessories without crowding the main hull.
  • Improved weight distribution: Heavy items like batteries or coolers can be placed on the outriggers, lowering the center of gravity.
  • Enhanced safety: A stable platform reduces the risk of accidental falls or capsizing.
  • Versatility: Many systems are removable, letting you switch between fishing, hunting, or leisure use.
  • Cost‑effective upgrade: Compared to buying a larger boat, outriggers are a relatively inexpensive way to boost performance.

Types of jon boat outrigger mounting options

There are three primary categories of jon boat outrigger mounting options:

  1. Bolt‑on mounts: These use marine‑grade bolts that pass through the hull and are secured with nuts and washers. They provide the strongest, most permanent attachment.
  2. Clamp‑on mounts: Heavy‑duty clamps grip the gunwale or transom without drilling. Ideal for those who want a non‑permanent solution.
  3. Slide‑on or track mounts: A metal track is installed once, and the outrigger arms slide into the track and lock with a pin. This offers quick release and re‑positioning.

Each type has its own advantages regarding installation time, strength, and flexibility. Bolt‑on mounts are best for heavy‑duty use, while clamp‑on and slide‑on systems suit occasional anglers who prefer easy removal.

Within the three categories, several designs dominate the market:

  • Aluminum tube outriggers: Lightweight, corrosion‑resistant, and easy to cut to length. Commonly paired with bolt‑on or clamp‑on bases.
  • Fiberglass‑reinforced outriggers: Slightly heavier but extremely stiff, providing minimal flex under load.
  • Inflatable outrigger pontoons: Made from PVC or Hypalon, they can be deflated for storage and inflated when needed. Often used with clamp‑on brackets.
  • Swing‑away outriggers: Mounted on a hinge, they can be folded flat against the hull when not in use, then swung out and locked.
  • Telescoping outriggers: Feature sections that slide inside each other, allowing you to adjust the width on the fly.

Choosing among these depends on your boat’s material, the typical load you’ll carry, and how often you want to install or remove the system.

How to Choose jon boat outrigger mounting options

Picking the right system involves a few key considerations:

  1. Boat size and weight: Measure the width and transom height of your jon boat. Ensure the outrigger arms are long enough to provide adequate stability without interfering with the motor or propeller.
  2. Weight capacity: Check the manufacturer’s rating for both the outrigger arms and the mounting hardware. Add the weight of gear, passengers, and any equipment you plan to place on the outriggers.
  3. Mounting preference: Decide if you want a permanent bolt‑on solution, a removable clamp‑on, or a slide‑on track system.
  4. Material: Aluminum is popular for its light weight and rust resistance. Fiberglass offers stiffness but can be heavier. Inflatable options are great for storage but need regular pressure checks.
  5. Ease of installation: If you’re not comfortable drilling into the hull, look for clamp‑on or track‑based kits that come with detailed instructions.
  6. Budget: Prices range from $80 for basic clamp‑on kits to $300+ for heavy‑duty bolt‑on systems with telescoping arms.

Take the time to read reviews, watch installation videos, and, if possible, test a friend’s setup before buying.

Installation and Setup of jon boat outrigger mounting options

Installing jon boat outrigger mounting options can be straightforward if you follow these steps:

  1. Gather tools and materials: You’ll need a drill with marine‑grade bits, stainless‑steel bolts or clamps, a wrench set, sealant (marine silicone), measuring tape, and a marker.
  2. Mark mounting points: Measure equal distances from the centerline on each side of the boat, usually 12‑18 inches out from the gunwale, depending on desired width. Mark the spots where the brackets will go.
  3. Drill holes: For bolt‑on mounts, drill pilot holes slightly smaller than the bolt diameter. Apply a dab of marine sealant around each hole to prevent water intrusion.
  4. Attach brackets: Insert the bolts through the hull from the inside, place washers and nuts on the outside, and tighten to the manufacturer’s torque specification. For clamp‑on models, position the clamp over the gunwale and tighten the adjustment screws until secure.
  5. Mount the outrigger arms: Slide the arms into the brackets, lock them with pins or bolts, and adjust the angle if the system allows.
  6. Test for stability: Before heading out, gently press down on each outrigger to ensure there is no movement or flex. Check that the bolts are tight and the sealant has cured.
  7. Final adjustments: Set the outrigger height so they sit just above the waterline when the boat is loaded. This maximizes lift while minimizing drag.

Always double‑check that all hardware is stainless steel or corrosion‑resistant to avoid rust in a marine environment.

Tips for Using “jon boat outrigger mounting options” Effectively

Getting the most out of your outriggers involves a few practical habits:

Leave a Comment